BS EN 10255:2004 - Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions – BSI British Standards

BS EN 10255:2004

Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions

Status : Current, Project Underway   Published : August 2004

Format
PDF

Format
HARDCOPY



This standard has been updated and the newly-amended edition is ready for purchase. It is an indispensable guide to those who specify, purchase or supply steel, of the standard purchase specifications and delivery conditions for circular non-alloy steel tubes suitable for welding and threading and provides a number of options for the finish of tube ends and coatings.

The Amendment was produced in order to fulfil the requirements of the EC mandate M/131 belonging to Construction Product Directive 89/106/EC. The scope of BS EN 10255:2004 has not changed.

This document covers tubes of specified outside diameter 10,2 mm to 165,1 mm (thread size 1/8 to 6) in two series, medium and heavy, and three types of designated thicknesses. This essential amendment has been prepared under Mandate M/131 “Pipes, tanks and ancillaries not in contact with water intended for human consumption” given to CEN by the European Commission and the European Free Trade Association in order to meet the requirements of the Mandate given under the EU Construction Products Directive (89/106/EEC).

Although the scope of BS EN 10255:2004 has not changed, BS EN 10255:2004 incorporating Amendment 1:2007 -  unusually for an amendment -  will supersede BS EN 10255:2004.

Contents Include:

Normative references
Terms and definitions
Classification and designation
Information to be obtained from the purchaser
Mandatory information
Examples of ordering by outside diameter and thickness
Ordering by thread size and series
Manufacturing process
Steelmaking process
Tube manufacturing process
Delivery conditions
Alternative finishes and protection of the tube ends
Suitability for hot dip galvanizing
Hot dip galvanized condition
Requirements
Chemical composition and mechanical properties
Appearance
Dimensions, masses and tolerances
Leak tightness
Dangerous substances
Reaction to fire
Type of inspection
Inspection documents
Tensile test
Bend test
Flattening test
Leak tightness test

Dimensional inspection
Visual examination
Marking
Temporary protective coating
Evaluation of conformity
Initial type testing (ITT)
Characteristics
Product families
Use of historical data
Deemed to satisfy’ provisions and use of reference tabulated data
Sampling
Factory production control (FPC)
Equipment
Raw materials and components
Product testing and evaluation
Non-conforming products
Correlation between specified outside diameter, thread size, and nominal
diameter
Types of tubes with wall thickness different from medium and heavy series
Marking
Clauses of this European Standard addressing the provisions of the EC
Construction Products Directive for applications covered by Mandate M/131
Scope and relevant characteristics
Procedure for attestation of conformity of pipes
Declaration of conformity
CE marking and labelling

BS EN 10255:2004 replaces BS 1387:1985, which has been withdrawn.




Standard NumberBS EN 10255:2004
TitleNon-alloy steel tubes suitable for welding and threading. Technical delivery conditions
StatusCurrent, Project Underway
Publication Date24 August 2004
Normative References(Required to achieve compliance to this standard)EN 10226-1, EN 10240, EN 10020, EN 10027-2, EN ISO 8492, EN 10242, ISO 2566-1:1984, EN ISO 1461, EN 10002-1, EN 10204, EN 10021, EN ISO 9001, EN 10241, EN 10246-1, EN 10226-2, EN ISO 2566-1, EN 10027-1, EN ISO 8491, ISO 9001:2000, ISO 1461:1999, ISO 8491:1998, ISO 8492:1998, EN 10266:2003
Informative References(Provided for Information)89/106/EEC, 93/68/EC
Amended ByCorrigendum, May 2007; Amendment, May 2007
DescriptorsThreads, Steels, Dimensions, Welding, Marking, Inspection, Mechanical properties of materials, Dimensional tolerances, Finishes, Pipes, Delivery, Unalloyed steels, Screwed fittings
ICS23.040.10
Title in FrenchTubes en acier non allie soudables et filetables. Conditions techniques de livraison
Title in GermanRohre aus unlegiertem Stahl mit Eignung zum Schweissen und Gewindeschneiden. Technische Lieferbedingungen
CommitteeISE/110
ISBN0 580 44330 2
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size689 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Customers who bought this product also bought

  • BS EN 10253-2:2007
    Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
  • BS EN 10143:2006
    Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
  • BS EN 10253-1:1999
    Butt-welding pipe fittings Wrought carbon steel for general use and without specific inspection requirements
  • BS EN 10240:1998
    Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants