BS EN 1852-1:2009 - Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system

BS EN 1852-1:2009

Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system

Status : Superseded, Withdrawn   Published : April 2009 Replaced By : BS EN 1852-1:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This part of EN 1852 specifies the requirements for solid wall pipes, fittings and the system of polypropylene (PP) piping systems intended for use for: ? non-pressure underground drainage and sewerage outside the building structure (application area code "U"), and ? non-pressure underground drainage and sewerage for both buried in ground within the building structure (application area code "D") and outside the building structure. This is reflected in the marking of products by "U" and "UD". This standard covers PP materials without mineral modifiers. It also specifies the test parameters for the test methods referred to in this standard. This standard covers a range of nominal sizes, and pipe series and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selection from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. In conjunction with Part 2 and Part 3 of EN 1852 it is applicable to PP pipes and fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for buried piping systems for non-pressure underground drainage and sewerage. This standard is applicable to PP pipes and fittings with or without an integral socket. NOTE 2 The fittings can be manufactured by injection-moulding or be fabricated from pipes and/or mouldings. NOTE 3 Requirements and limiting values for application area code "D" are given in Table 3, Table 7 and Table 14. NOTE 4 Pipes, fittings and other components conforming to any of the plastics product standards listed in Annex C can be connected to pipes and fittings conforming to this standard, when they conform to the requirements for joint dimensions given in Clause 6 and to the requirements of Table 14.




Standard NumberBS EN 1852-1:2009
TitlePlastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system
StatusSuperseded, Withdrawn
Publication Date30 April 2009
Withdrawn Date31 January 2018
Normative References(Required to achieve compliance to this standard)EN ISO 1043-1:2001, ISO 1133:2005, ISO 1043-1:2001, ISO 9969:2007, EN ISO 3126, EN 1053, ISO 3126:2005, ISO 2505:2005, ISO 1167-1:2006, EN ISO 472:2001, EN 681-2, EN 744:1995, EN ISO 1167-1, EN ISO 9969, EN 12061, EN 12256, EN ISO 580:2005, EN 728, EN ISO 2505:2005, EN ISO 1133, ISO 580:2005, EN 1411:1996, EN 681-1, EN 1055:1996, ISO 472:1999, EN 1277:2003, CEN/TS 14541:2007
Informative References(Provided for Information)ISO 4065, EN 295-3, ISO/TR 10358:1993, EN 1566-1, EN 476, prCEN/TS 1852-2, EN 1519-1, RAL 840-HR, EN 13476-1, EN 1455-1, EN 1565-1, EN 12666-1, EN 1329-1, EN 14758-1, EN 1451-1, ISO 7620:2005, ISO 13967, EN ISO 9967, EN 1401-1, ISO 11922-1, EN 13476-2, ISO 265-1:1988, EN 13476-3
Replaced ByBS EN 1852-1:2018
ReplacesBS EN 1852-1:1998
International RelationshipsEN 1852-1:2009
Draft Superseded By07/30165577 DC
DescriptorsPlastic pipelines, Pipe fittings, Impact testing, Diameter, Spigot-and-socket joints, Sewerage, Mechanical testing, Drop tests, Pipework systems, Sealing rings, Flexibility, Performance, Size, Elastomers, Flow rates, Length, Stiffness, Polypropylene, Drainage, Marking, Dimensional tolerances, Underground, Pipes, Thermoplastic polymers, Water supply and waste systems (buildings), Plastics, Thickness, Thermal stability
ICS23.040.01
23.040.05
91.140.80
93.030
Title in FrenchSystèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression. Polypropylène (PP). Spécifications pour tubes, raccords et le système
Title in GermanKunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen. Polypropylen (PP). Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
CommitteePRI/88/1
ISBN978 0 580 58894 5
PublisherBSI
FormatA4
DeliveryYes
Pages38
File Size1.08 MB
Price£214.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world