BS EN 15657-1:2009 - Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment. Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example

BS EN 15657-1:2009

Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment. Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example

Status : Superseded, Withdrawn   Published : November 2009 Replaced By : BS EN 15657:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


Part 1 of the standard shall apply to any source -receiver configuration where the receiver mobility is 10 dB below the source mobility (see definition of mobility in Clause 3 below). However, part 1 is restricted for the moment to whirlpool baths since only this type of building equipment has been experimentally studied so far; for other types of building equipment, the principle of the method is still valid, but some details in the standard might not be relevant. Therefore, this first part: - specifies methods for the measurement under laboratory conditions of airborne and structure borne sound produced by whirlpool baths connected to low mobility structures; for the case of whirlpool baths, building structures of mass per unit area equal or greater than 220 kg/m2, hollow elements excluded, are considered as low mobility elements; - defines the expression of the results, including data for comparison between products (single value descriptors) and input data for the prediction method (link to standard prEN 12354-5 explained in Annex B).




Standard NumberBS EN 15657-1:2009
TitleAcoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment. Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
StatusSuperseded, Withdrawn
Publication Date30 November 2009
Withdrawn Date18 September 2017
Normative References(Required to achieve compliance to this standard)ISO 7626-1:1986, EN ISO 140-3:1995, ISO 10848-1:2006, EN ISO 3741:1999, ISO 140-1:1997, EN ISO 10848-1:2006, EN ISO 140-1:1997, ISO 5348:1998, ISO 7626-2:1990, ISO 16063-21:2003, ISO 3741:1999, ISO 140-3:1995
Informative References(Provided for Information)IEC 60651:1993, EN 60651:1994, EN ISO 3822-1:1999, EN 12354-5:2009, ISO 3822-1:1999
Replaced ByBS EN 15657:2017
International RelationshipsEN 15657-1:2009
Draft Superseded By07/30161870 DC
DescriptorsLaboratory testing, Acoustic measurement, Acoustic testing, Vibration, Acoustics, Airborne noise, Mathematical calculations, Spa baths, Baths, Reverberation time, Building services, Sound intensity, Construction systems parts, Buildings
ICS91.120.20
Title in FrenchPropriétés acoustiques des éléments de construction et des bâtiments. Mesurage en laboratoire des bruits aériens et de structure des éléments de construction. Cas simplifiés prenant comme exemple les bains bouillonnants
Title in GermanAkustische Eigenschaften von Bauteilen und von Gebäuden. Messung des Luft- und Körperschalls von haustechnischen Anlagen im Prüfstand. Vereinfachte Fälle, in denen die Admittanzen der Anlagen wesentlich höher sind als die der Empfänger am Beispiel von Whi
CommitteeEH/1/6
ISBN978 0 580 58350 6
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size668 KB
Price£182.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months