BS EN 14753:2007 - Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel

BS EN 14753:2007

Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel

Status : Current, Work in hand   Published : May 2008

Format
PDF

Format
HARDCOPY



This European Standard applies for plant (containing machinery and equipment) used in the process of continuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1 and illustrated in Annex B. This European Standard deals with all significant hazards, hazardous situations and events relevant to machinery and equipment for the continuous casting of steel, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the safety requirements to be met during design, assembly, transport, commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment. This European Standard assumes that the machinery and equipment of the plant is operated and maintained by adequately trained and competent personnel (see 7.4). Manual intervention for setting, adjustment and maintenance is accepted as part of the intended use of the plant. This European Standard assumes that the machinery is used with adequate workplace lighting conforming to EN 12464-1. NOTE Local regulations regarding lighting should be considered and could differ from requirements of EN 12464-1. This European Standard applies to: CCM for the transformation of molten liquid steel into solid products in sections (e.g. square, rectangular, beam blank, circular) ? from the point where overhead cranes or other transport systems deposit ladles (e.g. in a ladle turret or ladle car); via casting process; via cutting equipment; to the run-out-area where the cut product is collected. This European Standard does not cover safety requirements for: auxiliary plants (e.g. water treatment, refractory handling); ladles; cranes; winches and hoists; conveyors or handling systems. This European Standard is not applicable to CCM, manufactured before the date of publication of this standard by CEN.




Standard NumberBS EN 14753:2007
TitleSafety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
StatusCurrent, Work in hand
Publication Date30 May 2008
Normative References(Required to achieve compliance to this standard)EN ISO 13849-1, EN 982, EN ISO 14122-1, EN 60204-1:2006, prEN 15004-1, EN 614-2, EN 50171, ISO 12100-2:2003, EN 61310-1, EN ISO 7731, EN ISO 11688-1, EN ISO 13732-1, ISO 7745, EN 1837, EN ISO 4871:1996, ISO 7731:2003, EN ISO 14122-4, EN ISO 11202, IEC 60204-1:2005, EN 981, EN 60204-1, ISO 11064-1:2000, EN 294, EN ISO 14122-2, EN 626-1:1994, EN 12094-1, ISO 11202:1995, IEC 61310-1:1995, ISO 13850:2006, EN 953:1997, ISO/TR 11688-1:1995, ISO 7000, ISO 4871:1996, EN 626-2:1996, IEC 60405, EN 1037:1995, IEC 61310-2:1995, ISO 13849-1:2006, EN 842, ISO 14122-3:2001, EN ISO 13850, EN 614-1, EN 811, EN 349, EN ISO 12100-1:2003, EN 574, EN 61310-2, EN 1088, EN ISO 14122-3, ISO 14122-4:2004, EN 1050, EN 983, ISO 14122-2:2001, EN 13478, EN ISO 13850:2006, ISO 12100-1:2003, EN ISO 11064-1, ISO 14520-1, EN ISO 12100-2:2003, ISO 13732-1:2006, ISO 14122-1:2001
Informative References(Provided for Information)ISO 5598, ISO 11691:1995, ISO 6682:1986, ISO/TR 11688-2:1998, ISO 11820:1996, ISO 11546-1:1995, ISO 6682:1986/AMD 1:1989, 98/37/EC, ISO 6743-4:1999, 2006/42/EC, ISO 11821:1997, EN ISO 11821, EN 894-3, EN ISO 11820, EN ISO 11691, 98/79/EC, EN ISO 11546-1, EN ISO 6743-4, EN ISO 6682, EN ISO 11688-2, EN 12464-1
International RelationshipsEN 14753:2007
Draft Superseded By03/313810 DC
DescriptorsContinuous casting, Instructions for use, Safety devices, Foundry equipment, Equipment safety, Hazards, Steels, Safety measures, Verification, Occupational safety, Production equipment, Noise (environmental), Steelmaking, Control equipment, Casting (process)
ICS77.180
Title in FrenchSécurité des machines. Prescriptions de sécurité pour les machines et équipements de coulée continue de l'acier
Title in GermanSicherheit von Maschinen. Sicherheitsanforderungen für Maschinen und Einrichtungen zum Stranggießen von Stahl
CommitteeMCE/23
ISBN978 0 580 58181 6
PublisherBSI
FormatA4
DeliveryYes
Pages50
File Size643 KB
Price£240.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version