BS EN ISO 18592:2009 - Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN ISO 18592:2009

Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens

Status : Withdrawn   Published : January 2010 Replaced By : BS EN ISO 18592:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN ISO 18592:2009 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens

BS EN ISO 18592 is an International Standard which specifies test specimens and procedures for performing constant load amplitude fatigue tests on multi-spot-welded and multi-axial specimens. It applies where the thickness of the specimen ranges from 0,5 mm to 5 mm at room temperature and a relative humidity of max. 80 %.

The applicability of BS EN ISO 18592 to larger thicknesses can be limited by mechanical properties such as yield strength and formability of the specimen material. The thickness range for advanced high strength steels (AHSS) is generally below 3,0 mm. Greater thicknesses apply for aluminium alloys, for example.

Contents of BS EN ISO 18592:

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Specimens
5.1 General
5.2 Selection of suitable specimens
5.3 Specimen fabrication
5.4 Specimen geometry
6 Requirements for testing machine
7 Specimen grips and alignment
7.1 General
7.2 Shear and peel loading
8 Test procedure
8.1 General
8.2 Mounting the H-specimens
8.3 Clamping procedure for the H-specimens
8.4 Fatigue test
8.5 Test termination
9 Test report
9.1 Basic information
9.2 Presentation of fatigue test results
Annex A (informative) Calibration specimen for verifying the load distribution in H-specimens
Annex B (informative) Hydraulic grips for the fatigue testing of H-specimens
Annex C (informative) Grip for the fatigue testing of H-specimens
Annex D (informative) Flow chart — Data acquisition
Bibliography

 




Standard NumberBS EN ISO 18592:2009
TitleResistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens
StatusWithdrawn
Publication Date31 January 2010
Confirm Date01 May 2015
Withdrawn Date07 October 2019
Cross ReferencesISO 14273, ISO 14324, ISO 15609-5:2004, ISO 6892-1, ASTM E468, ASTM E1942, EN 10130, EN 10346
Replaced ByBS EN ISO 18592:2019
International RelationshipsEN ISO 18592:2009,ISO 18592:2009
Draft Superseded By07/30154728 DC
DescriptorsTest equipment, Loading, Welding, Fatigue testing, Destructive testing, Welded joints, Shear stress, Spot welding, Mechanical testing, Metals, Test specimens, Resistance welding
ICS25.160.40
Title in FrenchSoudage par résistance. Essais destructifs des soudures. Méthode d'essai de fatigue des échantillons soudés par points multiples
Title in GermanWiderstandsschweißen. Zerstörende Prüfung von Schweißverbindungen. Verfahren zur Schwingfestigkeitsprüfung von geschweißten Mehrpunktproben
CommitteeWEE/29
ISBN978 0 580 57544 0
PublisherBSI
FormatA4
DeliveryYes
Pages46
File Size1.091 MB
Price£232.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


27 November

Organizational Resilience Annual Conference 2019


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.