BS EN 15544:2009 - One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning
Essential maintenance work will be carried out on BSI Shop over the weekend of 12 and 13 June 2021. BSI Shop will be operational during this time but you might experience slowness for a very brief period of time. Please accept our apologies for any inconvenience this may cause.

BS EN 15544:2009

One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning

Status : Current, Under review   Published : August 2009



This standard specifies calculations for the dimensioning of Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) based upon the required nominal heat output of the stove as declared by the producer. The Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) are of individual one-off construction design. The standard can be used for log wood fired Kachelöfen (tile stoves) that burn one fuel load per storage period with a maximum load between 10 kg and 40 kg and a storage period (nominal heating time) between 8 h and 24 h. This standard is valid for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) equipped with fireclay as interior material, with an apparent density between 1,750 kg/m³ and 2,200 kg/m³, a degree of porosity from 18 % up to 33 % by volume and a heat conductivity from 0,65 W/mK up to 0,90 W/mK (temperature range 20 °C to 400 °C). This standard is valid for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) with sidewise combustion air supply of the combustion chamber and an inflow speed from 2 m/s to 4 m/s, whereas the height of the lowest opening is at least 5 cm above the bottom of the combustion chamber. This standard is not valid for combinations with water heat exchangers for central heating or other heat absorbing elements like glass plates greater than 1/6 of the combustion chamber surface, open water tanks, etc. It is also not valid for combinations with heating/fireplace elements according to EN 13229. Furthermore this standard is not valid for mass-produced prefabricated or partly prefabricated slow heat release appliances according to EN 15250. NOTE Although for the purposes of this standard these calculations are applicable only to the requirements of this standard, the same calculations can be used for other purposes, e.g. to verify emission levels and energy efficiency in case of burning log wood or wood briquettes according to the producer’s manual.

Standard NumberBS EN 15544:2009
TitleOne off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning
StatusCurrent, Under review
Publication Date31 August 2009
Confirm Date09 November 2018
Normative References(Required to achieve compliance to this standard)EN 13384-1
Informative References(Provided for Information)EN 13229, EN 15250
International RelationshipsEN 15544:2009
Draft Superseded By06/30153142 DC
DescriptorsGases, Wood, Flow rates, Combustion, Thermal output, Thermal efficiency, Chimneys, Flues, Heaters, Mathematical calculations, Solid-fuel heaters, Solid-fuelled devices, Dimensions
Title in FrenchPoêles en faïence, poêles en maçonnerie fabriqués in situ. Dimensionnement
Title in GermanOrtsfest gesetzte Kachelgrundöfen/Putzgrundöfen. Auslegung
ISBN978 0 580 57332 3
File Size341 KB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Access, view and download standards with multiple user access, across multiple sites with BSOL

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Worldwide Standards
We can source any standard from anywhere in the world