BS EN 1715-1:2008 - Aluminium and aluminium alloys. Drawing stock. General requirements and technical conditions for inspection and delivery

BS EN 1715-1:2008

Aluminium and aluminium alloys. Drawing stock. General requirements and technical conditions for inspection and delivery

Status : Confirmed, Current   Published : October 2008

Format
PDF

Format
HARDCOPY



This European Standard specifies general requirements for drawing stock of aluminium and aluminium alloys delivered in the form of coils with a unit mass ranging between 1 t and 4 t and obtained by common industrial processes. It also specifies the technical conditions for inspection and delivery of these products. It applies to drawing stock intended for the following main fields of application: ? wires for general electrical purposes; ? wires for general mechanical uses; ? wires for brazing and welding and metal spraying; ? food packaging. The specific requirements to drawing stock for these applications are specified in EN 1715-2, EN 1715-3 and EN 1715-4. It does not apply to wires which are drawn, but only to drawing stock which is produced by hot-working. NOTE Three main methods exist for the manufacture of drawing stock: a) continuously cast rod (CCR): ? a section is cast continuously in the groove of a wheel, the groove being closed by an endless strip; ? the solid and still hot section is rolled in a multistand rolling mill to the required diameter; ? the drawing stock rod thus produced is wound continuously to form coils up to 4 t in mass; b) hot rolled rod (HRR): ? a wirebar of diameter approximately 100 mm to 150 mm is heated and rolled to the required diameter; ? the coils, weighing up to approximately 100 kg are butt welded together and wound to form coils with mass of 1 t to 4 t; c) hot extruded rod (HER): ? coils up to 100 kg can be produced in a single fibre without butt welds (depending on the size of the extrusion press); ? coils over 100 kg are normally produced by block on block extrusion, generating "Zweiwachs"-joints. For mechanical applications (i.e fasteners) the "Zweiwachs" area should be marked.




Standard NumberBS EN 1715-1:2008
TitleAluminium and aluminium alloys. Drawing stock. General requirements and technical conditions for inspection and delivery
StatusConfirmed, Current
Publication Date31 October 2008
Confirm Date19 June 2019
Normative References(Required to achieve compliance to this standard)EN 1715-2, ISO 18273:2004, EN 515, EN 10204, EN 573-3, EN 14726, EN 1715-4, EN 14242, EN 10002-1, EN ISO 18273, EN 1715-3, EN 12258-1:1998
Informative References(Provided for Information)No other standards are informatively referenced
ReplacesBS EN 1715-1:1998
International RelationshipsEN 1715-1:2008
Draft Superseded By06/30150275 DC
DescriptorsOrders (sales documents), Delivery, Documents, Storage, Rounding (numbers), Packaging, Wires, Coils, Aluminium, Aluminium alloys, Dimensional tolerances, Dimensions, Diameter, Quality assurance, Marking, Inspection, Quality control
ICS77.150.10
Title in FrenchAluminium et alliages d'aluminium. Fil machine. Exigences générales et conditions techniques de contrôle et de livraison
Title in GermanAluminium und Aluminiumlegierungen. Vordraht. Allgemeine Anforderungen und Technische Lieferbedingungen
CommitteeNFE/35
ISBN978 0 580 57005 6
PublisherBSI
FormatA4
DeliveryYes
Pages18
File Size403 KB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN 1715-2:2008
    Aluminium and aluminium alloys. Drawing stock Specific requirements for electrical applications