BS EN 15437-1:2009 - Railway applications. Axlebox condition monitoring. Interface and design requirements. Track side equipment and rolling stock axlebox

BS EN 15437-1:2009

Railway applications. Axlebox condition monitoring. Interface and design requirements. Track side equipment and rolling stock axlebox

Status : Current, Under review   Published : June 2009

Format
PDF

Format
HARDCOPY



This part of EN15437 defines the minimum characteristics for the interface between a trackside Hot Axlebox Detector (HABD) and Rolling Stock (RST) that comply with the European Directives for Interoperability to ensure that the minimum functional requirement of the interface is achieved. The minimum requirements of the interface apply to: a) Rolling stock conforming to standard European railway gauge, that is 1435mm; b) Rolling stock axles fitted with outboard bearings; NOTE The design of rolling stock axles fitted with inboard bearings should respect the requirements set out in Note 2 of 5.2. c) Rolling stock with a maximum operational speed of up to and including 250 km/h; NOTE 1 That is conventional rail and class 2 high speed rail rolling stock as defined in the rolling stock TSIs. NOTE 2 Interoperable rolling stock designed for speeds above 250km/h (class 1 high speed rolling stock) are mandated to have on-board equipment for axlebox condition monitoring. The requirements for on-board equipment are described in part 2 of this standard which is currently under development. NOTE 3 Interoperable rolling stock designed for speeds above 250km/h (class 1 high speed rolling stock) are outside the scope of this Part of the standard. However, if class 1 high speed trains are required to be monitored by HABDs their target area should comply with the requirements specified in this standard, except where stated otherwise. d) Trackside HABDs that are required to monitor conventional rail and class 2 high speed rail rolling stock. The rolling stock requirements of the interface are described in Clause 5 and for the HABD requirements of the interface are described in Clause 6.




Standard NumberBS EN 15437-1:2009
TitleRailway applications. Axlebox condition monitoring. Interface and design requirements. Track side equipment and rolling stock axlebox
StatusCurrent, Under review
Publication Date30 June 2009
Confirm Date27 July 2016
Normative References(Required to achieve compliance to this standard)EN 50125-3, IEC 60950-1:2005, ISO 14837-1, EN 60950-1, EN 15273-3, EN 50121-4:2016, EN 50121-3-1:2017
Informative References(Provided for Information)EN 12082:2007
International RelationshipsEN 15437-1:2009
Draft Superseded By05/30143127 DC
DescriptorsRailway vehicles, Railway vehicle components, Temperature-measuring instruments, Axle boxes, Warning devices, Overheating protection, Temperature measurement, Overheating, Bearings, Probes, Detectors, Railway equipment Railway applications
ICS45.060.01
Title in FrenchApplications ferroviaires. Surveillance des boîtes d'essieux. Exigences liées aux interfaces. Equipments des voies et conception des boîtes d'essieux pour matériel roulant
Title in GermanBahnanwendungen. Zustandsüberwachung von Radsatzlagern. Schnittstellen und Gestaltungsanforderungen. Heißläuferortungsanlagen und Radsatzlagergehäusegestaltung
CommitteeRAE/3/-/5
ISBN978 0 580 56197 9
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size907 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version