BS EN 13016-2:2007, BS 2000-409:2007 - Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40°C and 100°C

BS EN 13016-2:2007, BS 2000-409:2007

Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40°C and 100°C

Status : Current, Confirmed   Published : October 2007

Format
PDF

Format
HARDCOPY



petroleum products at elevated temperatures. The conditions used in the test described in this standard are a vapour to liquid ratio of 3:2 and an initial injection temperature of 37,8 °C or 30,0 °C. The method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 9 kPa and 500 kPa at temperatures between 40 °C and 100 °C. This European Standard is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [3]. NOTE 1 If a sample injection is into a test chamber which is raised to 37,8 °C and the vapour to liquid ratio is 4:1, the initial measurement corresponds with the measurement in Part 1 of this standard. NOTE 2 For the purposes of this European Standard, the term % (V/V) is used to represent the volume fraction. WARNING - Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.




Standard NumberBS EN 13016-2:2007, BS 2000-409:2007
TitleLiquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40°C and 100°C
StatusCurrent, Confirmed
Publication Date31 October 2007
Confirm Date03 December 2017
Normative References(Required to achieve compliance to this standard)ISO 3170:2004, EN ISO 3170
Informative References(Provided for Information)85/536/EEC, ASTM D 5191, IP 394, EN ISO 3171, ISO 3171:1988
ReplacesBS EN 13016-2:2000, BS 2000-409:2001
International RelationshipsEN 13016-2:2007
Draft Superseded By05/30143114 DC
DescriptorsVapour pressure, Petroleum products, Physico-chemical methods, Liquids, Air, Liquid fuels, Testing conditions, Saturated vapour pressure, Pressure measurement (fluids), Temperature, Pressure, Petroleum
ICS75.160.20
Title in FrenchProduits pétroliers liquides. Pression de vapeur. Détermination de la pression de vapeur absolue (PVA) entre 40°C et 100°C
Title in GermanFlüssige Mineralölerzeugnisse. Dampfdruck. Bestimmung des absoluten Dampfdruckes (AVP) im Temperaturbereich zwischen 40°C und 100°C
CommitteePTI/13
ISBN978 0 580 56195 5
PublisherBSI
FormatA4
DeliveryYes
Pages18
File Size374 KB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Customers who bought this product also bought