BS EN 13016-1:2007, BS 2000-394:2007 - Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

BS EN 13016-1:2007, BS 2000-394:2007

Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

Status : Superseded, Withdrawn   Published : October 2007 Replaced By : BS EN 13016-1:2018, BS 2000-394:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, low viscosity petroleum products, components, and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C. For referee testing the requirement to employ 1 l sample containers is mandatory. However, due to sample container size restrictions in taking automatic samples from vapour-locks either onboard a ship or from some land based storage tanks, the precision for 250 ml containers forms part of this standard and shall be used for referee purposes. NOTE 1 This standard states precision for both 1 l and 250 ml sample containers. Annex A provides information on the precision values when using 50 ml at 37,8 °C or using 1 l samples at a test temperature of 50,0 °C. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 9,0 kPa and 150,0 kPa at 37,8 °C. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [4]. NOTE 2 For the purposes of this European Standard, the term "% (m/m)"and “% (V/V)” are used to represent the mass, respectively the volume fraction. WARNING Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulator




Standard NumberBS EN 13016-1:2007, BS 2000-394:2007
TitleLiquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
StatusSuperseded, Withdrawn
Publication Date31 October 2007
Withdrawn Date20 April 2018
Normative References(Required to achieve compliance to this standard)ISO 3007, ISO 3170:2004, EN ISO 3170
Informative References(Provided for Information)EN 228, ASTM D 4953, ASTM RR:D02-1286:1991, IP 394, ASTM D 5191, ASTM RR:D02-1619, CEN/TC 19/WG 15 Precision Evaluation, 1991, EN ISO 3171, 85/536/EEC
Replaced ByBS EN 13016-1:2018, BS 2000-394:2018
ReplacesBS EN 13016-1:2000, BS 2000-394:2001
International RelationshipsEN 13016-1:2007
Draft Superseded By05/30143111 DC
DescriptorsPressure, Liquid fuels, Liquids, Air, Saturated vapour pressure, Petroleum, Physico-chemical methods, Vapour pressure, Petroleum products, Pressure measurement (fluids), Testing conditions, Temperature
ICS75.160.20
Title in FrenchProduits pétroliers liquides. Pression de vapeur. Détermination de la pression de vapeur saturée en air (PVSA) et de la pression de vapeur sèche équivalente calculée (PVSE)
Title in GermanFlüssige Mineralölerzeugnisse. Dampfdruck. Bestimmung des luftgesättigten Dampfdruckes (ASVP) und Berechnung des trockenen Dampfdruckäquivalentes (DVPE)
CommitteePTI/13
ISBN978 0 580 56194 8
PublisherBSI
FormatA4
DeliveryYes
Pages18
File Size302 KB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought