BS EN 61800-5-1:2007 - Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy

BS EN 61800-5-1:2007

Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy

Status : Current, Revised, Superseded   Published : October 2007 Replaced By : BS EN 61800-5-1:2007+A1:2017

Format
PDF

Format
HARDCOPY



IEC 61800-5-1:2007 It specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are traction and electric vehicle drives. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input voltages up to 35 kV, 50 Hz or 60 Hz and output voltages up to 35 kV. The major areas of change in this edition are the following:


- addition of alphabetical Table 1 in Clause 3;


- addition of Table 2 in 4.1 for relevance to PDS/CDM/BDM;


- addition of Table 4 summary of decisive voltage class requirements;


- expansion of subclause on protective bonding (4.3.5.3);


- clarification of distinction between touch current and protective conductor current;


- revision of section on insulation (now 4.3.6) to include solid insulation;


- addition of overvoltage categories I and II to HV insulation voltage;


- revision of section on Solid insulation (now 4.3.6.8);


- addition of high-frequency insulation requirements (4.3.6.9, Annex E);


- addition of requirements for liquid-cooled PDS (4.4.5);


- addition of climatic and vibration tests (5.2.6);


- clarification of voltage test procedure to avoid over-stress of basic insulation (5.2.3.2.3);


- revision of short-circuit test requirement for large, high-voltage and one-off PDS (now 5.2.3.6);


- addition of informative Annex B for overvoltage category reduction.




Standard NumberBS EN 61800-5-1:2007
TitleAdjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy
StatusCurrent, Revised, Superseded
Publication Date31 October 2007
Normative References(Required to achieve compliance to this standard)IEC 60050-161, EN 61230:1995/A11:1999, IEC 60664-3:2003, IEC/TR 60755, IEC 61800-4, EN 60947-7-1:2002, ISO 3864, IEC 60309, IEC 60068-2-6, EN 60309, IEC 60204-11, EN 60068-2-6:1995, IEC 60947-7-2:2002, EN 60695-11-10:1999, HD 60364-5-54:2007, EN 60695-11-20:1999, IEC 60617-DB, EN 60664-4:2006/Corrigendum:2006, EN 60204-11:2000, IEC 61800-1, IEC 60664-1:1992/AMD 1:2000, EN 60034-1:2004, EN 60664-4:2006, EN 62271-102:2002/Corrigendum:2005, EN 62271-102:2002, IEC 60112:2003, EN 60664-1:2003, EN 61800-2:1998, EN 60529:1991/Corrigendum:1993, EN 60034-5:2001, IEC 60034-5, IEC 60050-191, IEC 60050-551, IEC 60034, EN 60034, IEC 61800-2, IEC 60664-1:1992, IEC 60068-2-78, EN 61230:1995, IEC 60664-1:1992/AMD 2:2002, EN 60112:2003, IEC 60990:1999, IEC 60060-1:1989, IEC 60050-151, EN 60529:1991, EN 61800-1:1998, IEC 60695-2-13, IEC 60034-1, IEC 60417-DB, EN 60664-3:2003, IEC 60050-442, IEC 60050-111, EN 60695-2-13:2001, IEC 62020, EN 60695-2-10:2001, IEC 60364-1, IEC 60695-11-10, IEC 60068-2-2:1974, IEC 60529:1989, IEC 61230, IEC 60050-441, IEC 60947-7-1:2002, IEC 60364-5-54:2002, EN
Informative References(Provided for Information)IEC 60364-4-44, IEC 61140:2001, IEC 60695-2-11:2000, IEC 62079:2001, EN 60071-1:2006, EN 61082, EN 60309-1:1999, IEC 61643-12:2002, IEC 61082, EN 61140:2002, IEC 60721, IEC 60146-1-1, IEC 60695-2-12:2000, EN 60721, EN 60034-9:2005, EN 61180-1:1994, IEC 60664, EN 61800-3:2004, IEC 60071-1:2006, EN 60071-2:1997, EN 60695-2-11:2001, IEC 60050-195:1998, IEC 61180-1:1992, EN 60146-1-1:1993, IEC 60071-2:1996, EN 60695-2-12:2001, EN 61189-2:2006, IEC 61189-2, IEC 61800-3:2004, IEC 60050-826:2004, IEC 62103:2003, CLC/TS 61643-12:2006, EN 62079:2001, IEC 60034-9, IEC 60309-1, EN 60664, HD 60364-4-443:2006
Replaced ByBS EN 61800-5-1:2007+A1:2017
International RelationshipsIEC 61800-5-1:2007,EN 61800-5-1:2007
Draft Superseded By05/30139105 DC
DescriptorsElectrical safety, Thermal protection, Electrical transmission systems, Electric motors, Adjustment, Equipment safety, Velocity, Electrical equipment, Power transmission systems
ICS13.110
29.130.01
29.130.99
29.200
Title in FrenchEntraînements électriques de puissance à vitesse variable. Exigences de sécurité. Électriques, thermique et énergétique
Title in GermanElektrische Leistungsantriebssysteme mit einstellbarer Drehzahl. Anforderungen an die Sicherheit. Elektrische, thermische und energetische Anforderungen
CommitteePEL/22
ISBN978 0 580 55790 3
PublisherBSI
FormatA4
DeliveryYes
Pages124
File Size1.417 MB
Price£314.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 61800-5-2:2017
    Adjustable speed electrical power drive systems Safety requirements. Functional
  • BS EN 60664-1:2007
    Insulation coordination for equipment within low-voltage systems Principles, requirements and tests