BS ISO 8178-5:2008 - Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels – BSI British Standards

BS ISO 8178-5:2008

Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels

Status : Superseded, Withdrawn   Published : June 2009 Replaced By : BS ISO 8178-5:2015

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS ISO 8178-5:2008 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels

In comparison with engines for on-road applications, engines for off-road use are made in a much wider range of power output and configuration and are used in a great number of different applications.

Since fuel properties vary widely from country to country a broad range of different fuels is listed in BS ISO 8178-5 — both reference fuels and commercial fuels.

BS ISO 8178-5 specifies fuels whose use is recommended for performing the exhaust emission test cycles given in BS ISO 8178-4 and BS ISO 8178-11.

BS ISO 8178-5 applies to reciprocating internal combustion engines for mobile, transportable and stationary installations excluding engines for motor vehicles primarily designed for road use.

BS ISO 8178-5 may be applied to engines used, e.g. earth-moving machines and generating sets, and for other applications.

Contents of BS ISO 8178-5:

  • Foreword
  • Introduction
  • Scope
  • Normative references
  • Terms and definitions
  • Symbols and abbreviations
  • Choice of fuel
  • General
  • Influence of fuel properties on emissions from compression ignition engines
  • Influence of fuel properties on emissions from spark ignition engines
  • Overview of fuels
  • Natural gas
  • Liquefied petroleum gas
  • Motor gasolines
  • Diesel fuels
  • Distillate fuel oils
  • Residual fuel oils
  • Crude oil
  • Alternative fuels
  • Requirements and additional information
  • Calculation of the fuel specific factors
  • Equivalent non-ISO test methods
  • Organizations capable of providing specifications for commercial fuels
  • Bibliography



Standard NumberBS ISO 8178-5:2008
TitleReciprocating internal combustion engines. Exhaust emission measurement. Test fuels
StatusSuperseded, Withdrawn
Publication Date30 June 2009
Withdrawn Date30 November 2015
Normative References(Required to achieve compliance to this standard)EN 238:1996, ISO 2160:1998, ISO 6246:1995, ISO 4256:1996, ISO 4262:1993, ISO 3405:2000, ISO 8691:1994, ISO 3675:1998, ISO 3016:1994, ISO 14597:1997, ISO 8216-1:2005, ISO 10307-2, ISO 8178-1:2006, ISO 5164:2005, ISO 8217:2005, ISO 6245:2001, ISO 10307-1, ISO 3993:1984, ISO 8754:2003, ISO 5163:2005, ISO 7536:1994, ISO 3733:1999, ISO 4264:2007, ISO 10370, ISO 2719:2002, ISO 10478:1994, ISO 4260:1987, ISO 3015:1992, ISO 5165:1998, ISO 6615:1993, ISO 13757:1996, EN 116:1997, ISO 3830:1993, ISO 3105:1994, ISO 6974, ISO 3007:1999, ISO 7941:1988, ISO 6326-5:1989, ISO 3735:1999, ISO 3104:1994, ISO 8973:1997, ISO 3837:1993
Informative References(Provided for Information)JIS K 2255:1995, JIS K 2536-2:2003, ASTM D 5186-03, JIS K 2240:2007, ASTM D 3244-07a, ASTM D 2598-02, JIS K 2202:2007, JIS K 2536-3:2003, ASTM D 1267-02, IP 364/84, ASTM D 3231-07, ASTM D 445-06, ASTM D 2700-08, JIS K 2513:2000, JIS K 2536-6:2003, JIS K 2541-2:2003, ASTM D 5191-07, ISO 14596:2007, ISO 1998-1:1998, ASTM D 2713-07, ASTM D 2784-06, ASTM D 4530-07, JIS K 2288:2000, ASTM D 93-07, ASTM D 2699-08, JIS K 2275:1996, ASTM D 1266-07, ASTM D 1319-03e1, JIS K 2265-2:2007, ASTM D 5580-02, ASTM D 4737-04, ISO 4259:2006, JIS K 2283:2000, ISO 8178-11:2006, ISO 8178-4:2007, ASTM D 482-07, ASTM D 3341-05, ISO 12937:2000, ISO 1998-4:1998, ASTM D 2622-08, ASTM D 130-04e1, JPI-5S-49-97, JIS K 2536-5:2003, JIS K 2287:1998, ISO 1998-2:1998, ISO 22854, ASTM D 381-04e1, ISO 1998-5:1998, ISO 12156-1:2006, ASTM D 86-07b, ASTM D 1945-03, JIS K 2261:2000, IP 380/98, JIS K 2249:1995, ASTM D 3343-05, JIS K 2269:1987, ASTM D 1657-02, ASTM D 97-07, ASTM D 1837-02a, ISO 1998-7:1998, JIS K 2258:1998, JIS K 2541-6:2003, ASTM D 95-05e1, ASTM D 525-05, ASTM D 2158-05, ASTM D 323-06, JIS K 2254:1
Replaced ByBS ISO 8178-5:2015
ReplacesBS EN ISO 8178-5:1997
International RelationshipsISO 8178-5:2008
Draft Superseded By05/30136736 DC
DescriptorsAutomotive fuels, Exhaust gases, Fuels, Prime movers, Gasoline, Pollutant gases, Selection, Combustion products, Emission, Reciprocating engines, Liquid fuels, Technical data sheets, Diesel fuels, Gaseous fuels, Liquefied petroleum gas, Natural gas, Internal combustion engines, Gases
ICS13.040.50
27.020
Title in FrenchMoteurs alternatifs à combustion interne. Mesurage des émissions de gaz d'échappement. Carburants d'essai
Title in GermanHubkolben. Verbrennungsmotoren. Abgasmessung. Testkraftstoffe
CommitteeMCE/14/-/3
ISBN978 0 580 55610 4
PublisherBSI
FormatA4
DeliveryNo
Pages48
File Size919 KB
Price£240.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version