BS EN 15268:2008 - Petrol filling stations. Safety requirements for the construction of submersible pump assemblies – BSI British Standards

BS EN 15268:2008

Petrol filling stations. Safety requirements for the construction of submersible pump assemblies

Status : Confirmed, Current   Published : January 2009

Format
PDF

Format
HARDCOPY



BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies

BS EN 15268:2008  specifies safety requirements for design, installation, commissioning, use and maintenance of submersible pump assemblies. It applies to submersible pump assemblies intended for use with dispensers installed at petrol filling stations and used to dispense liquid fuels in accordance with BS EN 228 and BS EN 590 into tanks of motor vehicles, light aircrafts, boats and portable containers. The submersible pump assemblies are intended for use and storage at ambient temperatures between –20 °C and +40 °C.

BS EN 15268 specifies requirements for equipment with a maximum working pressure not exceeding 350 kPa (3,5 bar), power consumption not exceeding 7 KW and a maximum power supply voltage of 500 V. It applies to classes IIA T3 (explosion group IIA and temperature class T3) and IIB T4 (explosion group IIB and temperature class T4) using liquid fuels.

BS EN 15268 deals with all significant hazards, hazardous situations and events relevant to submersible pump assemblies, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

BS EN 15268:2008  contains:

  • Terms and definitions
  • List of significant hazards
  • Safety requirements and/or protective measures
  • Verification of the safety requirements and/or protective measures
  • Information for use.

Additional measures can be required for use and storage at temperatures outside this range and are subject to negotiation between the manufacturer and purchaser. BS EN 15268does not cover requirements for mobile equipment.




Standard NumberBS EN 15268:2008
TitlePetrol filling stations. Safety requirements for the construction of submersible pump assemblies
StatusConfirmed, Current
Publication Date31 January 2009
Confirm Date07 May 2019
Normative References(Required to achieve compliance to this standard)EN 13463-1:2001, EN 13617-1:2004, IEC 60079-14:2002, IEC 60079-0:2004, EN 60079-15:2005, IEC 60079-15:2005, IEC 60079-26:2006, EN 60079-14, ISO 12100-2:2003, EN 60204-1:2006, EN ISO 12100-1:2003, ISO 1817, IEC 60079-7:2006, EN 590, ISO 12100-1:2003, prEN 50495:2006, EN 60079-26, EN 60034-1, HD 22.4 S4, IEC 60204-1:2005, EN 60079-7, HD 21.13 S1, EN ISO 12100-2:2003, IEC 60034-1:2004, EN 13463-6, EN 60079-0, EN 228
Informative References(Provided for Information)EN 60529, IEC 60529:1989, 2006/42/EC, EN 13617-3, 94/9/EC, IEC/TS 60034-17:2002/Corrigendum 2:2003, IEC/TS 60034-17:2002/Corrigendum 1:2002, IEC/TS 60034-17:2002, EN 13160-4, 98/79/EC, CLC/TS 60034-17, 98/37/EC, EN 60730-2-10, CLC/TR 50404, EN 13160-2, EN 1050:1996, IEC 60730-2-10:1991
International RelationshipsEN 15268:2008
Draft Superseded By05/30135286 DC
DescriptorsMarking, Pumps, Explosions, Filling stations, Testing, Hazards, Filling devices, Gasoline, Safety measures, Pipework systems, Fuel pumps, Equipment safety, Liquid fuels, Explosive atmospheres
ICS75.200
Title in FrenchStations-service. Prescriptions de sécurité pour la construction des assemblages de pompes immergées
Title in GermanTankstellen. Sicherheitstechnische Anforderungen an die Bauweise von Tauchpumpen-Baugruppen
CommitteePVE/393
ISBN978 0 580 55491 9
PublisherBSI
FormatA4
DeliveryYes
Pages36
File Size386 KB
Price£214.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world