BS EN 1090-3:2008 - Execution of steel structures and aluminium structures. Technical requirements for aluminium structures – BSI British Standards

BS EN 1090-3:2008

Execution of steel structures and aluminium structures. Technical requirements for aluminium structures

Status : Superseded, Withdrawn   Published : August 2008 Replaced By : BS EN 1090-3:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN 1090-3 is the third part of the BS EN 1090 series of standards. It specifies requirements for the execution of aluminium structures, in order to ensure adequate levels of mechanical resistance and stability, serviceability and durability.

It also specifies requirements for the execution of aluminium structures in particular those that are designed according to BS EN 1999-1-1, BS EN 1999-1-2, BS EN 1999-1-3, BS EN 1999-1-4 and BS EN 1999-1-5.

This standard assumes that the work is carried out with the necessary skill and adequate equipment and resources to perform the work in accordance with the execution specification and the requirements of this European Standard.

BS EN 1090-3 specifies requirements for the execution of aluminium structural components and structures made from:

a) Rolled sheet, strip and plate
b) Extrusions
c) Cold drawn rod, bar and tube
d) Forgings
e) Castings.

BS EN 1090-3 covers components made of constituent products with thickness not less than 0,6 mm for welded components not less than 1,5 mm.

It also looks at requirements for surface preparation prior to application of a protective treatment, and gives guidelines for application for such treatment in an informative annex.

BS EN 1090-3 gives options for specifying requirements to match project specific requirements and also applies to temporary aluminium structures.


Also available:

BS EN 1090-2:2008 Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures




Standard NumberBS EN 1090-3:2008
TitleExecution of steel structures and aluminium structures. Technical requirements for aluminium structures
StatusSuperseded, Withdrawn
Publication Date29 August 2008
Withdrawn Date15 April 2019
Normative References(Required to achieve compliance to this standard)EN ISO 898-1, ISO 7049:1983, ISO 7093-1:2000, EN 12020-1, EN ISO 6789, EN 14399-7, EN ISO 3506-2, EN 1337-8, ISO 8839:1986, ISO 7094:2000, EN 1418, ISO 10042:2005, EN 1706, EN ISO 9000, EN ISO 7091, EN ISO 4018, EN 10204, EN 20898-2, EN 1301-3, EN ISO 13918, ISO 9018:2003, EN ISO 4017, EN 473, EN 1337-4, EN 754-1, EN 1999-1-2, ISO 9606-2:2004, EN ISO 10042:2005, EN 14399-5, EN ISO 7093-2, EN ISO 6520-1, EN 754-7, EN 1559-4, EN 970, EN 754-5, EN 1321, EN 14399-4, EN 485-1, EN ISO 13920, EN ISO 7089, EN ISO 4762, EN 485-4, EN 1301-1, ISO 4034:1999, EN ISO 7090, EN 1999-1-4, EN 755-6, EN 1090-2, EN 12206-1, ISO 7090:2000, EN 28839, EN 754-4, EN ISO 3834-4, EN 755-7, ISO 6520-1:2007, EN 14399-6, EN ISO 4034, EN ISO 3834-3, EN 12020-2, EN 571-1, EN ISO 3834-2, EN ISO 4016, EN 573-1, ISO 4762:2004, ISO 7089:2000, EN ISO 2009, EN 1337-3, ISO 1479:1983, EN 1337-11, EN ISO 7049, ISO 7091:2000, EN 573-2, EN 485-3, EN 755-8, ISO 3506-1:1997, ISO 4288:1996, EN 1714:1997, ISO 898-2:1992, EN 1999-1-1:2007, ISO 147, ISO 2009:1994, ISO 4014:1999, ISO 13920:1996, BS EN 14399-8:2018, ISO 3506-2:1997, BS EN 143
Informative References(Provided for Information)EN ISO 10513, EN ISO 10512, EN ISO 15977, EN ISO 7040, ISO 2320:1997, ISO 15978:2002, ISO 15973:2000, EN ISO 7719, CR ISO 17663, ISO/TR 17663:2001, EN ISO 15974, EN ISO 15981, ISO 15977:2002, EN ISO 7042, EN ISO 15973, EN 12487, EN ISO 15978, EN 22553, ISO 15974:2000, ISO 15981:2002, ISO 7040:1997, ISO 10512:1997, ISO 7719:1997, ISO 2553:1992, ISO 10513:1997, ISO 7042:1997, ISO 10511:1997, EN 12373-1, EN ISO 10511, EN ISO 2320
Replaced ByBS EN 1090-3:2019
ReplacesDD ENV 1090-3:2000
International RelationshipsEN 1090-3:2008
Draft Superseded By05/30133060 DC
DescriptorsConstruction operations, Approval testing, Corrosion protection, Buildings, Structures, Purchasing, Grades (quality), Structural systems, Structural design, Fasteners, Surface treatment, Inspection, Metal sections, Metalworking, Welded joints, Quality control, Aluminium, Welding, Tolerances (measurement), Adhesive-bonded joints, Erecting (construction operation)
ICS77.150.10
91.080.13
91.080.17
Title in FrenchExécution des structures en acier et des structures en aluminium. Exigences techniques pour l'exécution des structures en aluminium
Title in GermanAusführung von Stahltragwerken und Aluminiumtragwerken. Technische Regeln für die Ausführung von Aluminiumtragwerken
CommitteeB/525/9
ISBN978 0 580 55320 2
PublisherBSI
FormatA4
DeliveryYes
Pages116
File Size1.639 MB
Price£292.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Customers who bought this product also bought

  • BS EN 1090-1:2009+A1:2011
    Execution of steel structures and aluminium structures Requirements for conformity assessment of structural components
  • BS EN ISO 5817:2014
    Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
  • BS EN ISO 3834-3:2005
    Quality requirements for fusion welding of metallic materials Standard quality requirements
  • BS EN 1991-1-1:2002
    Eurocode 1. Actions on structures General actions