BS EN ISO 14343:2007 - Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification – BSI British Standards

BS EN ISO 14343:2007

Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification

Status : Revised, Withdrawn   Published : March 2007 Replaced By : BS EN ISO 14343:2009

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification
BS EN ISO 14343 specifies the requirements for classification of wire electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding and laser beam welding of stainless and heat resisting steels. The classification of the wire electrodes, wires and rods is based upon their chemical composition.

This standard provides for classification utilizing a system based upon classification according to nominal composition, or utilizing a system based upon classification according to alloy type.

Paragraphs and table entries which carry the label “classification according to nominal composition”, or which are identified by “ISO 14343-A”, are applicable only to products classified to that system
Paragraphs and table entries which carry the label “classification according to alloy type”, or that are identified by “ISO 14343-B”, are applicable only to products classified to that system
Paragraphs and table entries which carry neither label are applicable to products classified according to either or both systems.
It is recognized that there are two somewhat different approaches in the global market to classifying a given stainless steel welding consumable, and that market allows for either or both to be used, to suit a particular market need. One is termed the “Nominal Composition” approach, which uses designators that indicate the principal alloying elements at their nominal levels, in a particular sequence, sometimes followed by chemical element symbols to indicate compositional modifications to the original grade. The other is termed the “Alloy Type” approach, which uses tradition-based three or four digit designations for certain original grades, sometimes followed by one or more chemical element symbols which indicate compositional modifications from the original. In both approaches, classification is based upon the chemical composition of the product. In many cases a given product can be classified using both approaches, because the composition ranges, although slightly different, overlap to a considerable extent, in the two approaches.

Application of either type of classification designation (or both where suitable) identifies a product as classified according to this international standard. Many, but not all, commercial products addressed by this international standard can be classified using both approaches, and suitable products may be so marked. The classification according to system A is mainly based on BS EN 12072. The classification according to system B is mainly based upon standards used around the Pacific Rim.

For stainless steel welding consumables, there is no unique relationship between the product form (wire electrode, wire or rod) and the welding process used (gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding or submerged arc welding). For this reason, the wire electrodes, wires or rods may be classified on the basis of any of the above product forms and can be used, as appropriate, for more than one of the above processes.

Contents include:

  • Foreword
  • Introduction
  • Scope
  • Normative references
  • Terms and definitions
  • Classification
  • Symbol for the product/process
  • Symbol for the chemical composition
  • Properties of the all-weld metal
  • Chemical analysis
  • Technical delivery conditions
  • Examples of designation
  • Expected minimum tensile properties of all-weld metal


BS EN ISO 14343:2007 replaces BS EN 12072:2000 which has been withdrawn




Standard NumberBS EN ISO 14343:2007
TitleWelding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification
StatusRevised, Withdrawn
Publication Date30 March 2007
Withdrawn Date30 December 2009
Normative References(Required to achieve compliance to this standard)ISO 31-0:1992, ISO 544, ISO 864, ISO 14344
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN ISO 14343:2009
ReplacesBS EN 12072:2000
International RelationshipsEN ISO 14343:2007,ISO 14343:2002
DescriptorsWelding electrodes, Consumable electrodes, Bars (materials), Wires, Arc welding, Metal-arc welding, Gas-shielded welding, Gas tungsten-arc welding, Plasma-arc welding, Submerged arc welding, Electric welding, Laser beam welding, Steels, Stainless steels, Heat-resistant materials, Classification systems, Chemical composition, Designations, Tensile strength, Elongation, Proof stress, Heat treatment
ICS25.160.20
Title in FrenchProduits consommables pour le soudage. Fils-électrodes, fils d'apport et baguettes d'apport pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées. Classification
Title in GermanSchweißzusätze. Drahtelektroden, Bandelektroden, Drähte und Stäbe zum Schmelzschweißen von nichtrostenden und hitzebeständigen Stählen. Einteilung
CommitteeWEE/39
ISBN978 0 580 50375 7
PublisherBSI
FormatA4
DeliveryNo
Pages18
File Size536.3 KB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought

  • BS EN ISO 6520-1:2007
    Welding and allied processes. Classification of geometric imperfections in metallic materials Fusion welding
  • BS EN 10130:2006
    Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions
  • BS EN 60079-11:2007
    Explosive atmospheres Equipment protection by intrinsic safety "i"
  • BS EN 10140:2006
    Cold rolled narrow steel strip. Tolerances on dimensions and shape