BS EN ISO 13628-5:2009 - Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals – BSI British Standards

BS EN ISO 13628-5:2009

Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals

Status : Confirmed, Current   Published : January 2010

Format
PDF

Format
HARDCOPY



BS EN ISO 13628-5:2009 Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals

BS EN ISO 13628-5 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries.

Ancillary equipment does not include topside hardware. Topside hardware refers to any hardware that is not permanently attached to the umbilical, above the topside hang-off termination.

BS EN ISO 13628-5 applies to umbilicals containing components, such as electrical cables, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination.

BS EN ISO 13628-5 applies to umbilicals for static or dynamic service, with surface-surface, surfacesubsea and subsea-subsea routings.

BS EN ISO 13628-5 does not apply to the associated component connectors, unless they affect the performance of the umbilical or that of its ancillary equipment.

This part of ISO 13628 applies only to tubes with the following dimensions:

wall thickness, t < 6 mm, internal diameter, ID < 50,8 mm (2 in).

Tubular products greater than these dimensions can be regarded as pipe/linepipe and it is expected that they be designed and manufactured according to a recognised pipeline/linepipe standard.

BS EN ISO 13628-5 does not apply to a tube or hose rated lower than 7 MPa (1 015 psi).

BS EN ISO 13628-5 does not apply to electric cable voltage ratings above standard rated voltages
U0/U(Um) = 3,6/6(7,2) kV rms, where U0, U and Um are as defined in IEC 60502-1 and IEC 60502-2.

Contents of BS EN ISO 13628-5:

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 Functional requirements
5 Safety, design and testing philosophy
6 Design requirements
7 Component design, manufacture and test
8 Terminations and ancillary equipment design
9 Umbilical design
10 Umbilical manufacture and test
11 Factory acceptance tests
12 Storage
13 Pre-installation activity
14 Load-out
15 Installation operations




Standard NumberBS EN ISO 13628-5:2009
TitlePetroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals
StatusConfirmed, Current
Publication Date31 January 2010
Confirm Date19 May 2015
Normative References(Required to achieve compliance to this standard)ASTM A240, ISO 4080, ISO 7751, IEC 60794-1-2:2017, IEC 60228, EN 10204:2004, ISO 6801, ISO 527, ASTM A370, ISO 13628-8, ASTM E8/E8M, ASTM A1016/A1016M-04A, ASTM A480, ISO 1402, ITU-T G.976, ASTM E562, ASTM E1001, BS 5099, ASTM E309, ASTM E273, ASTM G48-03, IEC 60502-1, IEC 60794-1-1, IEC 60502-2, ASTM E384, ISO 4406, ASTM E1245, IEC 60793-1-1, ASTM E426, ISO 4672:1997, ASTM E92, ASTM E213, IEC 60793-2, ASTM A789/A789M, ISO 8308, ISO 6803:2008
Informative References(Provided for Information)ASTM A269, API Spec 17E, ASTM D974, ANSI/API RP 2RD, ANSI/API 17E, EN 10027, ASTM D664, EN 10204, API RP 17B, DNV RP-F203, BS 5950, ISO 14732, DNV RP-F109, IEC 60038, ISO 13628-6:2006, DNV RP-F201, ASTM A751, DNV RP-A203, DNV OS-F201-2001, EEMUA 194, ISO 9712, EN 10025, DNV RP-F204, ASTM A411, API RP 171, ISO 9606, ISO 13628-11, API Spec 17J, ASME Boiler &amp; Pressure Vessel Code Section V, ANSI/ASME B31.3, DNV RP-E305, ASME Boiler &amp; Pressure Vessel Code Section IX, ISO 15607, DNV RP-F105, DNV OS-F101, API RP 17I, ISO 13628-2, EN 10257-2, ASTM E747, ASTM E1025
ReplacesBS ISO 13628-5:2002
International RelationshipsEN ISO 13628-5:2009,ISO 13628-5:2009
Draft Superseded By07/30127452 DC
DescriptorsPetroleum technology, Drilling rigs, Petroleum extraction, Offshore construction works, Underwater, Natural gas extraction, Flexible pipes, Joints, Natural gas, Underwater extraction, Pipes, Wells
ICS75.180.10
Title in FrenchIndustries du pétrole et du gaz naturel. Conception et exploitation des systèmes de production immergés. Faisceaux de câbles immergés
Title in GermanErdöl- und Erdgasindustrie. Konstruktion und Betrieb von Unterwasser-Produktionssystemen. Unterwasser-Versorgungskabel
CommitteePSE/17/-/4
ISBN978 0 580 54921 2
PublisherBSI
FormatA4
DeliveryYes
Pages180
File Size2.43 MB
Price£342.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN ISO 13628-6:2006
    Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems
  • BS EN ISO 13628-7:2006
    Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems