BS EN 10088-4:2009 - Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes – BSI British Standards
Our payment provider will performing maintenance on 4th March 2021 between 4AM and 6AM UK time. During this period, you may experience slight interruptions when placing card orders. Please accept our apologies for any inconvenience caused during this essential maintenance.

BS EN 10088-4:2009

Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

Status : Current, Confirmed   Published : May 2009

Format
PDF

Format
HARDCOPY



BS EN 10088-4:2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

BS EN 10088 is the European standard that specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delivery conditions specified in BS EN 10021 General technical delivery requirements for steel products.

It has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Directive (89/106/EEC).

BS EN 10088-4 does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.

Contents of BS EN 10088 contain:

  • Scope
  • Normative references
  • Terms and definitions
  • Designation and ordering
  • Designation of steel grades
  • Order designation
  • Classification of grades
  • Requirements
  • Steelmaking process
  • Delivery condition
  • Chemical composition
  • Chemical corrosion properties
  • Mechanical properties
  • Surface quality
  • Internal soundness
  • Formability at room temperature
  • Dimensions and tolerances on dimensions and shape
  • Calculation of mass and tolerances on mass
  • Inspection and testing
  • Agreement on tests and inspection documents
  • Specific inspection and testing
  • Test methods
  • Retests
  • Evaluation of Conformity
  • Initial type testing
  • Factory production control (FPC)
  • Marking
  • Dangerous substances
  • Guidelines for further treatment (including heat treatment) in fabrication
  • Applicable dimensional standards
  • Relationship between this European Standard and the Essential
  • Requirements of EU Directive 89/106/EEC, EU Construction Products Directive
  • Bibliography

BS EN 10088 under the general title "Stainless steels", consists of the following parts:

Part 1: List of stainless steels (including a table of European Standards, in which these stainless steels are further specified)

Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes.

 




Standard NumberBS EN 10088-4:2009
TitleStainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
StatusCurrent, Confirmed
Publication Date31 May 2009
Confirm Date06 August 2019
Normative References(Required to achieve compliance to this standard)EN 10002-1, EN 10168:2004, ISO 377:1997, ISO 3651-2:1998, EN 10079:2007, EN 10088-1:2005, EN 10204, EN 10307, EN ISO 14284, EN 10163-2, ISO 6508-1:2005, EN ISO 6508-1, EN ISO 377, EN 10027-1, ISO 9001:2008, CEN/TR 10261, EN 10052:1993, EN ISO 3651-2, ISO 6506-1:2005, EN ISO 6507-1, EN 10088-2, EN ISO 6506-1, EN 10045-1, ISO 14284:1996, ISO 6507-1:2005, EN 10027-2, EN 10002-5, EN 10021, EN ISO 9001:2008
Informative References(Provided for Information)EN 10028-7, EN 10302, 89/106/EEC, EN 10151, EN 10095, 93/68/EEC
International RelationshipsEN 10088-4:2009
Draft Superseded By05/30126202 DC
DescriptorsStainless steels, Rolling, Surfaces, Construction materials, Sheet materials, Inspection, Approval testing, Mechanical properties of materials, Precipitation hardening, Heat treatment, Corrosion-resistant steels, Martensitic steels, Austenitic steels, Marking, Cold-working, Conformity, Steels, Designations, Strips, Chemical composition, Structural steels, Hot-working, Ferritic steels
ICS77.140.20
77.140.50
Title in FrenchAciers inoxydables. Conditions techniques de livraison des tôles et bandes en acier résistant à la corrosion pour usage de construction
Title in GermanNichtrostende Stähle. Technische Lieferbedingungen für Blech und Band aus korrosionsbeständigen Stählen für das Bauwesen
CommitteeISE/105
ISBN978 0 580 54855 0
PublisherBSI
FormatA4
DeliveryYes
Pages48
File Size829 KB
Price£246.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

Access, view and download standards with multiple user access, across multiple sites with BSOL


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought

  • BS EN 10088-5:2009
    Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
  • BS EN 10025-1:2004
    Hot rolled products of structural steels General technical delivery conditions
  • BS EN 10088-3:2014
    Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
  • BS EN 10204:2004
    Metallic products. Types of inspection documents