BS EN 50156-1:2004 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation

BS EN 50156-1:2004

Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation

Status : Revised, Superseded, Withdrawn   Published : January 2005 Replaced By : BS EN 50156-1:2015

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This standard applies to the application design and installation of electrical equipment, control circuits and protective systems for furnaces which are operated with solid, liquid or gaseous fuels and their ancillary equipment. It specifies requirements to meet the operating conditions of furnaces, to reduce the hazards of combustion and to protect the heated systems from damage e.g. by overheating. Such furnaces and the electrical equipment may be part of the following plants for example: a) Water heating systems b) Steam boiler installations (steam and hot-water boilers) and heat recovery steam boilers NOTE 1 The requirements of this standard apply according to the electrical equipment of electrically heated steam boilers. NOTE 2 Seagoing vessels and offshore facilities are governed by International Maritime Law and as such are not within the scope of this standard. These requirements may be used for such facilities. c) Warm air heaters d) Hot-gas heaters e) Heat exchanger systems f) Combustion chambers of stationary turbines g) As long as no other standard is applicable for combined heat and power stations it is recommended to use the requirements of this standard h) This standard may also be used as reference for electrical equipment requirements for thermo-processing equipment. NOTE 3 The requirements of this standard are applicable in all cases where an equipment specific standard does not specify a requirement. The requirements in this standard are not applicable to electrical equipment for: i) Non electrically heated appliances and burner control systems for household and similar purpose; j) Furnaces using technologies for the direct conversion of heat into electrical energy; k) Combustion chambers of non-stationary prime movers and turbines; l) Central oil supply systems for individual heating appliances; m) Furnaces using solid fuels for heating purposes for household use with a nominal thermal output up to 1 MW; n) Furnaces which are used to heat process fluids and gasses in chemical plant. This standard may be used as a basis for the requirements placed on electrical equipment for furnaces which are excluded from its field of application.




Standard NumberBS EN 50156-1:2004
TitleElectrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
StatusRevised, Superseded, Withdrawn
Publication Date20 January 2005
Withdrawn Date31 July 2015
Normative References(Required to achieve compliance to this standard)EN 61140:2002, EN 60034-1:1998/AMD 2:1999, IEC 60050-191:1990, EN 60947-2:1989/AMD 1:1997, IEC 60309-1:1999, IEC 61346-1:1996, EN 61082, EN 60947-5, IEC 61508-1, EN 60947-2:1989/AMD 2:2001, EN 50265-1:1998, EN 60034-1:1998/AMD 1:1998, IEC 60529:1989, EN 60445:2000, IEC 60519-1:1984, IEC 60204-1:1997, IEC 60664-1:1992/AMD 2:2002, HD 384.4, IEC 60034-1:1996, EN 60947-3:1990/AMD 1:2001, IEC 60092-101:1994, EN 60204-1:1997, IEC 61131-3:2003, ISO 3864:1984, HD 472 S1:1989/AMD 1:1995, CISPR 11:1997, IEC 60038:1983, IEC 61558-1:1997, EN 55011:1998, EN 61131-3:2003, EN 55022:1998, EN 61346-1:1996, CISPR 22:1997, EN 60529:1991, EN 61000-4, EN 60654-3:1997, EN 55022:1998/AMD 1:2000, IEC 60034-1:1996/AMD 2:1999, IEC 60364-4-41:1992, EN 60519-1:1993, IEC 61140:2001, IEC 60947-4-1:2000, IEC 60654-3:1983, EN 298:1993, IEC 60947-5, IEC 61810-1:1998, IEC 60092-101:1994/AMD 1:1995, HD 384.5.54 S1:1988, EN 61810-1:1998, EN 55011:1998/AMD 2:2002, CISPR 11:1997/AMD 1:1999, EN 60034-1:1998, IEC 60364-5-54:1980, EN 60947-2:1989, IEC 60536-2:1992, IEC 60617, EN 55022:1998/AMD 2:2003, CIS
Informative References(Provided for Information)IEC 60326-3:1991, EN 60870-5-1:1993, EN ISO 9004:2000, EN 61131-2:1994, IEC 60038:1983/AMD 1:1994, IEC 60947-1:1999, IEC 60038:2002, ISO 9004:2000, EN 60947-4-1:1999, IEC 60038:1983, IEC 61131-1:1992, IEC 60332-2:1989, IEC 60884-1:2002, IEC 61131-2:1992, EN 50075:1990, EN ISO 9001:2000, IEC 60038:1983/AMD 2:1997, EN 61131-1:1994, IEC 60364-5-54:2002, ISO 9001:2000, IEC 60870-5-1:1990
Replaced ByBS EN 50156-1:2015
International RelationshipsEN 50156-1:2004
Draft Superseded By93/210506 DC
DescriptorsFlow charts, Protected electrical equipment, Turbines, Electric cables, Earthing, Hot-water central heating, Stationary, Computer hardware, Furnaces, Maintenance, Warm-air heating, Installation, Documents, Gas-powered devices, Circuits, Heating equipment, Combustion chambers, Electrical safety, Switches, Auxiliary, Computer software, Electric conductors, Safety devices, Steam boilers, Electrical connections, Error detection, Electrical equipment, Electrical protection equipment, Heat exchangers
ICS27.060.01
Title in FrenchEquipements electriques d'installation de chaudiere. Regles pour la conception, pour l'application et l'installation
Title in GermanElektrische Ausruestung von Feuerungsanlagen. Bestimmungen fuer die Anwendungsplanung und Errichtung
CommitteePEL/27
ISBN0 580 45264 6
PublisherBSI
FormatA4
DeliveryNo
Pages76
File Size1.581 MB
Price£274.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Customers who bought this product also bought

  • BS EN 298:2003
    Automatic gas burner control systems for gas burners and gas burning appliances with or without fans