BS EN 60567:2005 - Oil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance

BS EN 60567:2005

Oil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance

Status : Revised, Withdrawn   Published : December 2005 Replaced By : BS EN 60567:2011

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


Deals with the techniques for sampling free gases from gas-collecting relays and for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors. Three methods of sampling free gases and three methods of sampling oil are described; the choice between the methods often depends on the apparatus available and on the quantity of oil needed for analysis. Before analysing the gases dissolved in oil, they must first be extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping), and the last one by partition of gases between the oil sample and a small volume of the carrier gas (head space). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment. The preferred method for assuring the performance of the gas extraction and analysis equipment, considered together as a single system, is to degas samples of oil prepared in the laboratory and containing known concentrations of gases ("gas-in-oil standards") and quantitatively analyse the gases extracted. Two methods of preparing gas-in-oil standards are described. For daily calibration checks of the chromatograph, it is convenient to use a standard gas mixture containing a suitable known amount of each of the gas components to be in a similar ratio to the commons ratios of the gases extracted from transformer oils. The techniques described take account, on the one hand, of the problems peculiar to analyses associated with acceptance testing in the factory, where gas contents of oil are generally very low and, on the other hand, of the problems imposed by monitoring equipment in the field, where transport of samples may be by un-pressurized air freight and where considerable differences in ambient temperature may exist between the plant and the examining laboratory. The main changes with respect to the previous edition are listed below. Since the publication of the second edition of this standard, a number of new gas extraction methods have been developed and are commercially available, such as mercury-free versions of the standard Toepler and partial degassing methods, which are referenced to in Annex C of the present edition. The head space method, based on a new concept for the extraction of gases from oil is introduced as a full method in this third edition, and reference is made to a simplified version of it also in Annex C (shake test method). More sensitive chromatographic techniques have also been developed since the last edition, and are presented in this third edition.




Standard NumberBS EN 60567:2005
TitleOil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance
StatusRevised, Withdrawn
Publication Date02 December 2005
Withdrawn Date29 February 2012
Normative References(Required to achieve compliance to this standard)EN ISO/IEC 17025:2005, ISO/IEC 17025, IEC 60599, EN 60296:2004, EN 60599:1999, IEC 60296, EN 60296:2004/Corrigendum:2004, ISO 5725
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN 60567:2011
ReplacesBS EN 60567:1993, IEC 60567:1992
International RelationshipsEN 60567:2005,IEC 60567:2005
DescriptorsSensitivity, Calibration, Oil-filled electrical equipment, Mineral oils, Gas-solid chromatography, Testing conditions, Relays, Dissolved gases, Chemical analysis and testing, Precision, Gases, Sampling methods, Electrical equipment, Control samples, Degassing (chemical technology), Samples, Oils, Test equipment, Sampling equipment, Gas analysis, Extraction methods of analysis, Accuracy, Insulating oils, Quantitative analysis, Error correction
ICS17.220.99
29.035.99
29.040.10
Title in FrenchMateriels electriques immerges. Echantillonnage de gaz et d'huile pour analyse des gaz libres et dissous. Lignes directrices
Title in GermanOelgefuellte elektrische Betriebsmittel. Probennahme von Gasen und von Oel fuer die Analyse freier und geloester Gase. Anleitung
CommitteeGEL/10
ISBN0 580 47279 5
PublisherBSI
FormatA4
DeliveryNo
Pages68
File Size1.354 MB
Price£254.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version