BS EN 10083-2:2006 - Steels for quenching and tempering. Technical delivery conditions for non alloy steels – BSI British Standards

BS EN 10083-2:2006

Steels for quenching and tempering. Technical delivery conditions for non alloy steels

Status : Superseded, Withdrawn   Published : August 2006 Replaced By : BS EN ISO 683-1:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


BS EN 10083-2:2006 is an indispensable guide developed by technical experts for those who specify, purchase or supply steel. It specifies the technical delivery requirements for semi-finished and hot formed products such as:

  • blooms
  • billets
  • slabs
  • bars
  • rod
  • wide flats
  • hot-rolled strip and sheet/plate
  • forgings

manufactured from the direct hardening non-alloy steels for quenching and tempering and the non alloy flame and induction hardening steels and supplied in one of the heat treatment conditions given for the different types of products  surface conditions.

This standard should be read in conjunction with Part 1.

The steels are generally intended for the manufacture of quenched and tempered, flame or induction hardened machine parts, but can also be used in the normalized condition.

BS EN 10083-2 is not applicable for  bright steel products for which the BS EN 10277 series should be consulted.

In the same series, Part 3 of BS EN 10083 provides similar specifications for alloy steels.

Contents:

  • Scope
  • Normative references
  • Terms and definitions
  • Classification and designation
  • Classification
  • Designation
  • Information to be supplied by the purchaser
  • Mandatory information
  • Options
  • Manufacturing process
  • General
  • De-oxidation
  • Heat treatment and surface condition at delivery
  • Cast separation
  • Requirements
  • Chemical composition, hardenability and mechanical properties
  • Machinability
  • Shearability of semi-finished products and bars
  • Structure
  • Internal soundness
  • Surface quality
  • Dimensions, tolerances on dimensions and shape
  • Inspection
  • Testing procedures and types of documents
  • Frequency of testing
  • Tests to be carried out for specific inspection
  • Preparation of samples and test pieces
  • Selection and preparation of samples for chemical analysis
  • Location and orientation of samples and test pieces for mechanical tests
  • Location and preparation of samples for hardness and hardenability tests
  • Identification of samples and test pieces
  • Test methods
  • Chemical analysis
  • Mechanical tests
  • Hardness and hardenability tests
  • Retests
  • Marking, labelling, packaging
  • Annex A (normative) Ruling sections for the mechanical properties
  • Annex B (normative) Options
  • Annex C (informative) Other relevant standards
  • Annex D (informative) Dimensional standards applicable to products complying with this
    European Standard
  • Annex E (informative) Determining the non-metallic inclusion content

BS EN 10083-2:2006 supersedes BS EN 10083-2:1991, which has been withdrawn.




Standard NumberBS EN 10083-2:2006
TitleSteels for quenching and tempering. Technical delivery conditions for non alloy steels
StatusSuperseded, Withdrawn
Publication Date31 August 2006
Withdrawn Date21 June 2018
Normative References(Required to achieve compliance to this standard)ISO 6508-1:2005, EN ISO 642, EN 10160, EN 10045-1, EN 10020, ISO 642:1999, EN 10083-1:2006, ISO 377:1997, EN 10027-2, EN ISO 643, EN 10221, ISO 14284:1996, EN ISO 6506-1, EN 10027-1, EN ISO 18265, EN ISO 377, ISO 643:2003, EN 10002-1, ISO 6506-1:2005, EN 10308, CR 10261, EN ISO 6508-1:2005, EN ISO 14284, ISO 3887:2003, EN 10204, EN ISO 3887, ISO 18265:2003, EN 10163-2
Informative References(Provided for Information)EN 10021
Replaced ByBS EN ISO 683-1:2018
ReplacesBS EN 10083-2:1991
International RelationshipsEN 10083-2:2006
Draft Superseded By05/30132598 DC
DescriptorsYield stress, Steels, Heat-treatable steels, Sample location, Bars (materials), Unalloyed steels, Tensile strength, Chemical composition, Testing conditions, Forgings, Elongation at fracture, Yield strength, Designations, Marking, Hardness, Strips, Sheet materials, Heat treatment, Semi-finished products
ICS77.140.10
Title in FrenchAciers pour trempe et revenu. Conditions techniques de livraison des aciers non allies
Title in GermanVerguetungsstaehle. Technische Lieferbedingungen fuer unlegierte Staehle
CommitteeISE/105
ISBN0 580 49098 X
PublisherBSI
FormatA4
DeliveryYes
Pages40
File Size583.8 KB
Price£214.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 10025-1:2004
    Hot rolled products of structural steels General technical delivery conditions
  • BS EN 10277-2:2008
    Bright steel products. Technical delivery conditions Steels for general engineering purposes
  • BS EN 10210-1:2006
    Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
  • BS EN 10130:2006
    Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions