BS EN 14598-3:2005 - Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Specific requirements

BS EN 14598-3:2005

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Specific requirements

Status : Confirmed, Current   Published : May 2005

Format
PDF

Format
HARDCOPY



This part of prEN 14598 specifies the requirements for physical and chemical properties of Sheet moulding Compounds (SMC) and Bulk Moulding Compound (BMC) and compression or injection moulded specimens. The selection in this part is limited to those materials the composition and properties of which are significantly different. Furthermore the selection is limited to those materials which are of more general technical and / or economical importance. The properties which are used for the characterization of the moulding compounds, the test methods and the test conditions are based on part 2 of this standard. The list of properties is selected, initially, from those general test methods found in ISO 10350-1, Plastics - Acquisition and presentation of comparable single-point data - Part 1 : Moulding materials. The moulding compounds are divided into types corresponding to their composition and properties. The designation of the types of moulding compounds is based on part 1 "Designation and basis for specifications" of this standard.




Standard NumberBS EN 14598-3:2005
TitleReinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Specific requirements
StatusConfirmed, Current
Publication Date25 May 2005
Confirm Date03 September 2018
Normative References(Required to achieve compliance to this standard)IEC 60707:1999, ISO 3795, ISO 12114:1997, ISO 12115:1997, IEC 60695-11-10:1999, EN ISO 295, EN ISO 12115, ISO 295:2004, EN 60695-11-10, EN ISO 12114, EN 60707
Informative References(Provided for Information)ISO 10724-2:1998, ISO 179-1:2000, ISO 1268-11, ISO 2039-1:2001, EN ISO 14125, EN ISO 10352, EN ISO 6721-1, EN ISO 3167, ISO 14125:1998, EN ISO 4589-2, ISO 10350-2:2001, EN 14598-2, EN ISO 1172, EN ISO 179-1, EN ISO 291, ISO 11357-2, ISO 2818:1994, EN ISO 1183, ISO 8605, EN 14598-1, EN 60243-1, EN ISO 10724-1, ISO 11359-2, EN ISO 14126, ISO 179-2:1997, EN ISO 8256, prEN 60695-2-1, ISO 1268-10, ISO 8256:2004, IEC 60112:2003, EN ISO 2818, EN ISO 178, ISO 6603-2:2000, ISO 3167:2002, EN ISO 527-4, IEC 60167, EN 60296, ISO 527-1:1993/Technical Corrigendum 1:1994, EN ISO 899-1, IEC 60695-11-20:1999, EN ISO 11667, EN ISO 179-2, ISO 14126:1999, IEC 60250:1969, IEC 60243-1:1998, ISO 10352:1997, ISO 175:1999, ISO 11667:1997, ISO 2577, IEC 60695-2-1:1991, EN 60112, ISO 4589-2:1996, IEC 60093:1980, ISO 1183, ISO 291:1997, ISO 527-4:1997, EN ISO 10350-2, ISO 527-1:1993, ISO 6721-1:2001, EN ISO 527-1, ISO 178:2001, EN ISO 6603-2, ISO 1268-8, ISO 899-1:2003, EN ISO 175, EN ISO 2039-1, EN ISO 10724-2, IEC 60296:2003, ISO 1172:1996
ReplacesBS 5734-1:1990, BS 5734-2:1990, BS 5734-3:1990, BS 5734-4:1990
International RelationshipsEN 14598-3:2005
Draft Superseded By02/124520 DC
DescriptorsElectrical insulating materials, Fillers, Chemical properties, Thermosetting polymers, Test specimens, Testing conditions, Polymers, Solid electrical insulating materials, Physical properties of materials, Test methods, Plastics, Bulk materials, Sheet materials, Moulding (process), Chemical analysis and testing, Polyesters, Moulding compounds, Reinforced materials
ICS83.120
Title in FrenchMelanges a mouler thermodurcissables renforces. Specification pour mats preimpregnes (SMC) et melanges a mouler en masse (BMC). Exigences specifiques
Title in GermanVerstaerkte haertbare Formmassen. Spezifikation fuer Harzmatten (SMC) und faserverstaerkte Pressmassen (BMC). Spezifische Anforderungen
CommitteePRI/42
ISBN0 580 46020 7
PublisherBSI
FormatA4
DeliveryYes
Pages24
File Size844 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version