BS EN 13476-2:2007 - Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

Related Standards

BS EN 13476-2:2007

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

Status : Superseded, Withdrawn   Published : July 2007 Replaced By : BS EN 13476-2:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. This part is applicable to pipes and fittings with smooth internal and external surfaces, designated as Type A. It specifies test methods and test parameters as well as requirements. This part is applicable to: a) structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure; reflected in the marking of products by “U”; b) structured-wall pipes and fittings, which are intended to be used buried underground both outside (application area code “U”) and within the building structure (application area code “D”); reflected in the marking of products by “UD”. This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints. This part is intended to be read in conjunction with part 1 of this standard This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application classes, and tolerance classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 For dimensions larger than DN 1200 OD/ID this document may be applied regarding appearance, colour, physical and mechanical characteristics as well as performance requirements.




Standard NumberBS EN 13476-2:2007
TitlePlastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
StatusSuperseded, Withdrawn
Publication Date31 July 2007
Withdrawn Date07 June 2018
Normative References(Required to achieve compliance to this standard)EN ISO 3126, ISO 13967, ISO 2505:2005, ISO 1133:2005, EN ISO 1133:2005, EN 1446, ISO 3126:2005, EN 1401-1, EN ISO 1167-1, EN 14758-1, EN ISO 3451-1, EN 14741, EN 12256, ISO 1167-2:2006, EN ISO 1167-2, ISO 9969:1994, EN 13476-1:2007, EN 1055:1996, ISO 9967:1994, EN 681-1, CEN/TS 14541:2007, EN 1852-1:2018, EN 1411, EN 580, EN 728, EN 1053, EN 476, EN 1905, EN 727, EN ISO 2505, EN 12666-1, ISO 580:2005, EN ISO 9969, EN 13476-3, EN ISO 1183-1, EN 12061, ISO 3451-1:1997, EN ISO 9967, EN 744, EN ISO 580, ISO 1167-1:2006, EN 681-4, EN 1277, EN 1979, EN 922, EN 1437, EN 681-2, ISO 1183-1:2004
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN 13476-2:2018
International RelationshipsEN 13476-2:2007
Draft Superseded By06/30082990 DC
DescriptorsPolyethylene, Drainage, Plastics, Marking, Physical properties of materials, Polypropylene, Performance, Pipes, Polyvinyl chloride, Recycling, Pipework systems, Testing conditions, Unplasticized polyvinyl chloride, Sewerage, Plastic pipelines, Underground, Sewers, Pipe fittings
ICS23.040.20
93.030
Title in FrenchSystèmes de canalisations en plastiques pour les branchements et les collecteurs d'assainissement sans pression enterrés. Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC- U), polypropylène (PP) et polyéthylène (PE). Spécifications pour les tubes et raccords avec une surface interne et externe lisse et le système, de Type A
Title in GermanKunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen. Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE). Anforderungen an Rohre und Formstücke mit glatter Innen- und Außenfläche und an das Rohrleitnungssystem, Rohrtyp A
CommitteePRI/88/1
ISBN978 0 580 53623 6
PublisherBSI
FormatA4
DeliveryYes
Pages48
File Size549 KB
Price£240.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world