BS EN 14963:2006 - Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods

BS EN 14963:2006

Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods

Status : Under review, Current   Published : November 2006

Format
PDF

Format
HARDCOPY



This European Standard specifies requirements for continuous rooflights made of plastic materials (e.g. GF-UP, PC, PMMA, PVC) with or without bearing profiles to be used with upstands made of e.g. GF-UP, PVC, steel, aluminium, wood or concrete, for laying in roofs, which serve the purpose of lighting by means of daylight and, possibly, of ventilating interior spaces by means of opening devices. This European Standard applies to continuous rooflights without upstand and to continuous rooflights, where a single manufacturer provides all components of the rooflight with upstand, which are bought in a single purchase. Products covered by this European Standard may be supplied as continuous rooflights with and without upstand and rooflights intended to be used with an upstand, for which the upstand is specified, but not supplied. It applies to continuous rooflights when mounted with an inclination ? in the longitudinal direction not more than 10° to the horizontal and not more than 10° in the transversal direction (see Figure 1): a) with bearing profiles: ? symmetrical, angled, curved (see Figure 2) or flat (see Figure 3); ? constructed with bearing profiles parallel to the span and with a rectangular ground plan; b) without bearing profiles: ? symmetrical, angled or curved with an ? angle not more than 45° (measured to the horizontal at the line of fixing, see Figure 4); ? constructed with a span (width) lower than or equal 2,5 m and with a rectangular ground plan. This European Standard applies to continuous rooflights, including barrel vault rooflights, with a rectangular ground plan of plastic glazing laying in roofs having, in addition a minimum distance of b/3 (b = effective span of rooflights, corresponding to the light opening). The upstands may be self-supporting or non self-supporting. The design of the upstand is not part of this European Standard. Upstands can be prefabricated or site fabricated. Prefabricated upstands are to be considered as p




Standard NumberBS EN 14963:2006
TitleRoof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
StatusUnder review, Current
Publication Date30 November 2006
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)No other standards are informatively referenced
International RelationshipsEN 14963:2006
Draft Superseded By04/30099887 DC
DescriptorsMarking, Radiation protection, Roof coverings, Natural ventilation, Conformity, Plastics, Classification systems, Airborne sound insulation, Air permeability, Continuous, Natural lighting, Mechanical properties of materials, Durability, Rooflights, Watertightness tests, Thermal resistance, Roofs, Fire resistance, Designations
ICS91.060.20
Title in FrenchElements de couverture. Lanterneaux continus en matiere plastique avec et sans costiere. Classification, specifications et methodes d'essais
Title in GermanDachdeckungen. Dachlichtbaender aus Kunststoff mit oder ohne Aufsetzkrae nzen. Klassifizierung, Anforderungen und Pruefverfahren
CommitteeB/542/8
ISBN0 580 49747 X
PublisherBSI
FormatA4
DeliveryYes
Pages60
File Size976 KB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS 9250:2007
    Code of practice for design of the airtightness of ceilings in pitched roofs
  • BS 6262-2:2005
    Glazing for buildings Code of practice for energy, light and sound
  • BS EN 14449:2005
    Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
  • BS EN 383:2007
    Timber structures. Test methods. Determination of embedment strength and foundation values for dowel type fasteners