BS EN ISO 898-1:1999 - Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs – BSI British Standards

BS EN ISO 898-1:1999

Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs

Status : Revised, Withdrawn   Published : October 1999 Replaced By : BS EN ISO 898-1:2009

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs

Executive summary

Requirements for the mechanical properties of bolts, screws and studs made of carbon steel and alloy steel tested at an ambient temperature.

Abstract

This part of ISO 898 specifies the mechanical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 degrees C to 35 degrees C.

Products conforming to the requirements of this International Standard are evaluated only in the ambient temperature range and may not retain the specified mechanical and physical properties at higher and lower temperatures. Attention is drawn to Annex A which provides examples of lower yield stress and stress at 0,2 % non-proportional elongation at elevated temperatures.

This part of ISO 898 applies to bolts, screws and studs:

- with coarse pitch thread M1.6 to M39, and fine pitch thread M8 × 1 to M39 × 3;

- with triangular ISO thread in accordance with ISO 68-1;

- with diameter/pitch combinations in accordance with ISO 261 and ISO 262;

- with thread tolerance in accordance with ISO 965-1 and ISO 965-2;

- made of carbon steel or alloy steel.

This International Standard does not apply to set screws and similar threaded fasteners not under tensile stresses which are specified in ISO 898-5.

History and related standards

This International Standard supersedes BS EN 20898-1:1992 which is withdrawn. This standard includes the following cross references:

ISO 83:1976, ISO 273:1979, ISO 724:1978, ISO 898-2:1992, ISO 898-7:1992,

ISO 6157-1:1988, ISO 6157-3:1988, ISO 6506:1981, ISO 6507-1:1997,

ISO 6508:1986, ISO 6892:1998.




Standard NumberBS EN ISO 898-1:1999
TitleMechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs
StatusRevised, Withdrawn
Publication Date15 October 1999
Withdrawn Date30 April 2009
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN ISO 898-1:2009
ReplacesBS EN 20898-1:1992, ISO 898-1:1988
International RelationshipsEN ISO 898-1:1999,ISO 898-1:1999
Draft Superseded By96/715367 DC
DescriptorsFasteners, Steels, Mechanical properties of materials, Unalloyed steels, Alloy steels, Bolts, Screws (bolts), Studs (fasteners), External-thread fasteners, Temperature, Thread pitch, Dimensions, Designations, Mechanical testing, Tensile strength, Elongation at fracture, Yield stress, Chemical composition, Compositional tolerances, Tempering, Hardness, Physical properties of materials, Surface properties, Approval testing, Proof loading, Tensile testing, Hardness testing, Impact testing, Test equipment, Testing conditions, Test specimens, Specimen preparation, Angles (geometry), Decarburization, Marking, Symbols, Dimensional changes
ICS21.060.10
Title in FrenchCaracteristiques mecaniques des elements de fixation en acier au carbone et en acier allie. Vis et goujons
Title in GermanMechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl. Schrauben
CommitteeFME/9
ISBN0 580 35176 9
PublisherBSI
FormatA4
DeliveryNo
Pages38
File Size738.9 KB
Price£214.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought