BS EN 13476-1:2007 - Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). General requirements and performance characteristics

Related Standards

BS EN 13476-1:2007

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). General requirements and performance characteristics

Status : Superseded, Withdrawn   Published : July 2007 Replaced By : BS EN 13476-1:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This standard, together with EN 13476 2 and EN 13476 3, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are to be used for non-pressure underground drainage and sewerage systems. This standard is applicable to: a) structured-wall pipes and fittings, which are to be used buried in the ground outside a building structure only; reflected by the marking of products by “U”; b) structured-wall pipes and fittings, which are to be used buried in the ground both outside (application area code “U”) and within a building structure (application area code “D”); reflected in the marking of products by “UD”. In conjunction with EN 13476 2 and EN 13476 3 it is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints, as well as welded and fused joints. This part specifies general aspects and gives guidance concerning a national selection of requirement levels and classes where part 2 and part 3 of this standard provide options. EN 13476 2 and EN 13476 3 specify material characteristics, dimensions and tolerances, test methods, test parameters and requirements for pipes with smooth internal and external surfaces, Type A, and pipes with smooth internal and profiled external surfaces, Type B. This standard covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes and tolerance classes and offers recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 Pipes, fittings and other components conforming to any plastic product standards referred to in clause 2 can be used with pipes and fittings conforming t




Standard NumberBS EN 13476-1:2007
TitlePlastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). General requirements and performance characteristics
StatusSuperseded, Withdrawn
Publication Date31 July 2007
Withdrawn Date07 June 2018
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN 13476-1:2018
International RelationshipsEN 13476-1:2007
Draft Superseded By06/19970535 DC
DescriptorsPipework systems, Polypropylene, Polyethylene, Polyvinyl chloride, Designations, Plastics, Stiffness, Drainage, Grades (quality), Underground, Sewerage, Pipes, Pipe fittings, Performance, Unplasticized polyvinyl chloride, Plastic pipelines, Sewers
ICS23.040.20
93.030
Title in FrenchSystèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés. Systèmes de canalisation à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE). Exigences générales et caractéristiques de performance
Title in GermanKunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen. Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE). Allgemeine Anforderungen und Leistungsmerkmale
CommitteePRI/88/1
ISBN978 0 580 53026 5
PublisherBSI
FormatA4
DeliveryYes
Pages34
File Size443 KB
Price£214.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.