BS EN 13476-3:2018+A1:2020 - Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B

BS EN 13476-3:2018+A1:2020

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B

Status : Current   Published : June 2018

Format
PDF

Format
HARDCOPY



This part of EN 13476, together with EN 13476 1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. This part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B. It specifies test methods and test parameters as well as requirements. This part is applicable to: a) structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure, reflected in the marking of products by "U"; b) structured-wall pipes and fittings, which are intended to be used buried underground both outside (application area code "U") and within the building structure (application area code "D"), reflected in the marking of products by "UD". This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints. This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application classes, and tolerance classes and gives recommendations concerning colours. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.




Standard NumberBS EN 13476-3:2018+A1:2020
TitlePlastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
StatusCurrent
Publication Date07 June 2018
Normative References(Required to achieve compliance to this standard)EN 476, EN ISO 1158, ISO 12091, ISO 6259-2, EN ISO 13254, EN ISO 3126, EN ISO 1133-1, EN ISO 9967, EN ISO 13264, EN ISO 13968, EN 681-2, EN ISO 13257:2017, EN 13476-2:2018, EN 13476-1:2018, EN 15346:2014, ISO 13259:2018, BS EN ISO 13259:2018, EN ISO 13229, EN 1401-1, EN 12666-1, EN ISO 9969, EN ISO 13263, EN 12099, EN ISO 13967, EN ISO 1183-1, EN ISO 13262, EN ISO 9852, EN 14758-1, EN ISO 3127, EN ISO 1167-2, EN ISO 2507-1, EN ISO 11173, EN ISO 1167-1, EN ISO 11357-6, EN 14680, EN ISO 580, ISO 18373-1, EN ISO 3451-1, EN ISO 13260, EN 1852-1, EN 681-1, EN ISO 6259-1, EN 681-4
Informative References(Provided for Information)ISO 13265, EN ISO 9001, TS 14541, EN ISO 2505, EN ISO 2507-2
ReplacesBS EN 13476-3:2007+A1:2009
International RelationshipsEN 13476-3:2018+A1:2020
Amended ByAmendment, August 2020
Draft Superseded By19/30389689 DC
DescriptorsMarking, Recycling, Physical properties of materials, Sewers, Polyvinyl chloride, Pipework systems, Sewerage, Underground, Testing conditions, Drainage, Performance, Plastics, Polypropylene, Plastic pipelines, Polyethylene, Pipe fittings, Unplasticized polyvinyl chloride, Pipes
ICS23.040.01
23.040.05
23.040.20
93.030
Title in FrenchSystèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés. Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Spécifications pour les tubes et raccords avec une surface interne lisse et une surface externe profilée et le système, de Type B
Title in GermanKunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen. Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE) Anforderungen an Rohre und Formstücke mit glatter Innen- und profilierter Außenfläche und an das Rohrleitungssystem, Typ B
CommitteePRI/88/1
ISBN978 0 539 03554 4
PublisherBSI
FormatA4
DeliveryYes
Pages58
File Size2.171 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world