BS EN 13001-3-5:2016+A1:2021 - Cranes. General design. Limit states and proof of competence of forged and cast hooks

BS EN 13001-3-5:2016+A1:2021

Cranes. General design. Limit states and proof of competence of forged and cast hooks

Status : Current   Published : January 2017

Format
PDF

Format
HARDCOPY



This European Standard is to be used together with EN 13001-1 and EN 13001-2 and, as such, they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in crane hooks. This European Standard covers the following parts of hooks and types of hooks: - bodies of any type of hooks made of steel forgings; - machined shanks of hooks with a thread/nut suspension. Principles of this European Standard can be applied to machined shanks of hooks in general. However, stress concentration factors relevant to designs not given in this standard would have to be determined and applied. NOTE 1 Cast hooks and plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this European Standard. The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards: a) exceeding the limits of strength (yield, ultimate, fatigue); b) exceeding temperature limits of material. The requirements of this European Standard are stated in the main body of the document and are applicable to forged hook designs in general. The commonly used hook body and shank designs listed in Annexes A, B and F are only examples and should not be referred to as requirements of this European Standard. Annex I gives guidance for the selection of a hook size, where a hook body is in accordance with Annex A or B. The selection of hook form is not limited to those shown in Annexes A and B. This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types. NOTE 2 This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1. FprA1: Add after 1st paragraph the following sentence: " It has to be used together with the other generic parts of EN 13001 series of standards, see Annex L. ". Replace in 2nd paragraph the 1st list item with: " - bodies of any type of hooks made of steel forgings or steel castings, including stainless steel;". Replace NOTE 1 with: " NOTE 1 Plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this document.". In the 4th paragraph, replace the 1st list item with: " a) exceeding the limits of yield strength, ultimate strength, fatigue strength, brittle fracture;". Replace the 5th paragraph with: "The requirements of this document are stated in the main body of the document and are applicable to hook designs in general.". After 4th paragraph, add the sentence: " The hazards covered by this document are identified by Annex M. ".




Standard NumberBS EN 13001-3-5:2016+A1:2021
TitleCranes. General design. Limit states and proof of competence of forged and cast hooks
StatusCurrent
Publication Date31 January 2017
Normative References(Required to achieve compliance to this standard)EN 10025-3:2019, EN ISO 6892-1:2016, EN 12680-1:2003, CEN ISO/TR 15608:2017, EN 10254:1999, EN 13001-3-2:2014, EN ISO 898-2:2012, EN 1369:2012, EN ISO 12100:2010, EN 10228-2:2016, EN 1371-1:2011, EN 10228-1:2016, EN 1559-1:2011, EN 10250-3:1999, EN 10340:2007, EN 10250-1:1999, EN 13001-2:2014, EN 13001-1:2015, EN 10228-3:2016, EN ISO 683-2:2018, ISO 965-1:2013, EN 10204:2004, EN 1370:2011, EN 10222-4:2017, EN 10250-2:1999, EN ISO 643:2012
Informative References(Provided for Information)EN 10083-1:2006, EN 614-1, EN 1677-5, ISO 630?2, DIN 15400, ISO 630-1
ReplacesDD CEN/TS 13001-3-5:2010
International RelationshipsEN 13001-3-5:2016+A1:2021
Amended ByAmendment, June 2021
Draft Superseded By17/30357386 DC
DescriptorsStability, Load capacity, Cranes, Lifting equipment, Lifting, Classification systems, Design, Structural members, Equipment safety, Structural design, Aerodynamic characteristics, Materials handling equipment, Climatic loading, Factor of safety, Loading, Wind loading, Mathematical calculations, Verification
ICS53.020.20
53.020.30
Title in FrenchAppareils de levage à charge suspendue. Conception générale Etats limites et vérification des crochets forgés et moulés
Title in GermanKrane. Konstruktion allgemein Grenzzustände und Sicherheitsnachweise von geschmiedeten und gegossenen Haken
CommitteeMHE/3/1
ISBN978 0 580 97770 1
PublisherBSI
FormatA4
DeliveryYes
Pages98
File Size1.751 MB
Price£280.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

Access, view and download standards with multiple user access, across multiple sites with BSOL