BS EN ISO 1452-3:2010 - Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings

BS EN ISO 1452-3:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings

Status : Current   Published : January 2012

Format
PDF

Format
HARDCOPY



This part of ISO 1452 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure.

It also specifies the test parameters for the test methods referred to in this part of ISO 1452.

In conjunction with ISO 1452‑1, ISO 1452‑2 and ISO 1452‑5, it is applicable to PVC-U fittings and to joints with components of PVC-U, other plastics and non-plastics materials intended to be used for the following:

  1. water mains and services buried in the ground;

  2. conveyance of water above ground for both outside and inside buildings;

  3. buried and above-ground drainage and sewerage under pressure.

It is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption and for general purposes as well as for waste water under pressure.

This part of ISO 1452 is also applicable to components for the conveyance of water and waste water up to and including 45 °C. For temperatures between 25 °C and 45 °C, Figure A.1 of ISO 1452‑2:2009 applies.

NOTE 1

The producer and the end-user can come to agreement on the possibilities of use for temperatures above 45 °C on a case-by-case basis.

Depending on the jointing method, this part of ISO 1452 is applicable to the following types of fittings:

  • fittings for solvent cementing;

  • elastomeric ring seal fittings.

PVC-U fittings can be manufactured by injection-moulding and/or be fabricated from pipe.

This part of ISO 1452 is also applicable to PVC-U flange adapters and to the corresponding flanges made from various materials.

This part of ISO 1452 covers a range of fitting sizes and pressure classes and gives requirements concerning colours.

NOTE 2

It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.




Standard NumberBS EN ISO 1452-3:2010
TitlePlastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
StatusCurrent
Publication Date31 January 2012
Normative References(Required to achieve compliance to this standard)ISO 7-1:1994, ISO 580, ISO 1167-1, ISO 1167-3, ISO 1183-1:2004, ISO 1452-1:2009, ISO 1452-2:2009, ISO 1452-5, ISO 2507-1:1995, ISO 2507-2:1995, ISO 3126, ISO 7686, ISO 13783, EN 802
Informative References(Provided for Information)ISO/TR 4191, ENV 1452-7, CEN/TR 15438
ReplacesBS EN ISO 1452-3:2009
International RelationshipsEN ISO 1452-3:2010,ISO 1452-3:2009
Amended ByCorrigendum, August 2015.
Draft Superseded By10/30228627 DC
DescriptorsPlastics, Pipework systems, Pipes, Plastic pipelines, Unplasticized polyvinyl chloride, Polyvinyl chloride, Water, Water supply, Water supply (buildings), Water supply and waste systems (building, Sewerage, Drainage, Sewers, Drainpipes, Potable water, Pressure, Pressure pipes, Temperature, Size, Dimensions, Classification systems, Colour codes, Marking, Pipe fittings, Pipe couplings, Adhesive-bonded joints, Spigot-and-socket joints, Flanged fittings, Flanges, Cold-water supply systems, Elastomers, Sealing rings, Elbows (pipes), Pipe tees, Mechanical properties of materials, Physical properties of materials, Pressure testing, Hydraulic tests
ICS23.040.20
23.040.45
91.140.60
93.025
Title in FrenchSystèmes de canalisations en plastique pour l'alimentation en eau, pour branchements et collecteurs d'assainissement enterrés et aériens avec pression. Poly(chlorure de vinyle) non plastifié (PVC-U). Raccords
Title in GermanKunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungsund Abwasserdruckleitungen. Weichmacherfreies Polyvinylchlorid (PVC-U). Formstücke
CommitteePRI/88/2
ISBN978 0 580 91512 3
PublisherBSI
FormatA4
DeliveryYes
Pages48
File Size1.373 MB
Price£246.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN ISO 1452-1:2009
    Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General
  • BS EN ISO 1452-4:2009
    Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) Valves
  • BS EN ISO 1452-5:2009
    Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) Fitness for purpose of the system
  • BS EN ISO 1452-2:2009
    Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) Pipes