BS EN 3909:2016 - Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies

BS EN 3909:2016

Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies

Status : Current   Published : June 2016



This standard specifies the list of test fluids to be used to demonstrate that components and sub-assemblies will not be adversely affected by contamination by fluids types that they may typically be exposed to. The fluids listed are representative of those commonly used and encountered in airborne and ground operations, and align with the requirements of fluids susceptibility of ISO 7137. This shall not be considered an exhaustive list and additional test fluids may be instructed in the product standard, against which compliance needs to be demonstrated. This standard, when used in conjunction with the test requirements defined in Clause 6 or the product standard shall be considered the starting point to test a component to determine its minimum performance capability when exposed to the fluids listed. Test results obtained from a number of sources over a considerable period of time have shown that, in many cases, widely varying results can be obtained when using fluids that are used in service. The practice of specifying fluids based on performance criteria rather than their constituents can mean variations in test results between batches of the fluid obtained from different manufacturers, or even from the same manufacturer. For this reason the EN 3909 Standard recommends the use of "standard test fluids" which are specified by their constituents and contain the chemicals that may be found in commonly used fluids. Where equipment may be exposed to fluid types that are not covered by Table 1 or where specific test fluids are considered to be necessary, the product standard shall identify the particular fluid required. If a manufacturer chooses to include additional test fluids (e.g. to satisfy a customer requirement), they do so at their own risk.

Standard NumberBS EN 3909:2016
TitleAerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies
Publication Date30 June 2016
Normative References(Required to achieve compliance to this standard)EN 3745-411, EN 3475-411, EN 3841-405, ASTM D740, EN 2349-405, AMS 1428G, ISO 11075, MIL-PRF-87937, ISO 1817, EN 4057-303, AMS 1476B, EN 2591-315, ISO 11078, ISO 7137
Informative References(Provided for Information)No other standards are informatively referenced
ReplacesBS EN 3909:2007
International RelationshipsEN 3909:2016
Draft Superseded By12/30259929 DC
DescriptorsElectrical components, Environmental testing, Liquids, Electronic equipment and components, Working fluids, Chemical-resistance tests, Aircraft components, Contamination, Test equipment
Title in FrenchSérie aérospatiale. Fluides d'essais et méthodes d'essai pour composants et sous-ensembles électriques et optiques
Title in GermanLuft- und Raumfahrt. Prüfflüssigkeiten und Prüfverfahren für elektrische und optische Bauelemente und Untergruppen
ISBN978 0 580 90777 7
File Size1.648 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Develop a PAS

Develop a fast-track standardization document in 9-12 months


Access, view and download standards with multiple user access, across multiple sites with BSOL

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version