BS EN 16767:2016 - Industrial valves. Steel and cast iron check valves

BS EN 16767:2016

Industrial valves. Steel and cast iron check valves

Status : Superseded, Withdrawn   Published : April 2016 Replaced By : BS EN 16767:2020

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


This European Standard specifies the requirements for cast iron or steel check valves, which are forged, cast or fabricated in straight, angle or oblique pattern (see EN 736‑2) with end connections flanged or wafer, butt welding, socket welding, or threaded.

This European Standard applies to check valves mainly used for industrial and general purpose applications. However, they may be used for other applications provided the requirements of the relevant performance standards are met.

Back flow prevention anti-pollution check valves are outside the scope of this European standard.

The range of nominal sizes covered is:

DN 8, DN 10; DN 12, DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000.

DN 8 and DN 12 are not used for PN designated flanged end connections.

DN 8, DN 10 and DN 12 are not used for Class designated flanged end connections.

DN 750 is used for Class designated valves only.

Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65.

The range of pressure designations covered is:

  1. for flanged end and wafer type end cast iron bodies:

    • PN 2,5; PN 6; PN 10; PN 16; PN 25;

    • Class 125; Class 250;

  2. for flanged end, wafer type and butt welding end steel bodies:

    • PN 40; PN 63; PN 100;

    • Class 150; Class 300; Class 600;

  3. for socket welding end and threaded end steel bodies:

    • PN 40; PN 63; PN 100;

    • Class 600; Class 800.

NOTE

Class 800 is a widely used Class designation for socket welding and threaded end valves.




Standard NumberBS EN 16767:2016
TitleIndustrial valves. Steel and cast iron check valves
StatusSuperseded, Withdrawn
Publication Date30 April 2016
Withdrawn Date27 April 2020
Normative References(Required to achieve compliance to this standard)EN ISO 14732, prEN 12760:2015, EN ISO 9606-1, EN 12982:2009, EN 1092-2:1997, EN 12516-2:2014, EN 12627:1999, ISO 7-1:1994, EN 12516-1:2014, EN 736-1:2018, EN 10269:2013, EN 12516-4:2014, EN 19:2016, ISO 228-1, EN 1759-1:2004, EN 1092-1:2007+A1:2013, ISO 9606-1, ISO 14732, EN 16722, prEN 558:2015, ANSI/ASME B1.20.1, ISO 15607, EN ISO 228-1, EN 736-2, EN ISO 15607, EN 12266-1, EN 736-3, EN 12351
Informative References(Provided for Information)ISO 4200, ISO 1629, EN ISO 1043-1, EN 12516-3, EN ISO 148-1, EN ISO 9692-1, ISO 1043-1, ASME B16.25, ISO 148-1, ISO 9692-1, ASME B36.10M, EN 1515-4, ISO 7005-2, EN 12266-2
Replaced ByBS EN 16767:2020
ReplacesBS EN 14341:2006, BS EN 12334:2001
International RelationshipsEN 16767:2016
Draft Superseded By14/30301577 DC
DescriptorsCast-iron, Check valves, Valves, Ratings, Dimensions, Marking, Inspection, Industrial, Identification methods
ICS23.060.50
Title in FrenchRobinetterie industrielle. Clapets de non-retour en acier et en fonte
Title in GermanIndustriearmaturen. Rückflussverhinderer aus Gusseisen und Stahl
CommitteePSE/18
ISBN978 0 580 86697 5
PublisherBSI
FormatA4
DeliveryYes
Pages20
File Size864 KB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards