BS EN 12480:2015 - Gas meters. Rotary displacement gas meters

BS EN 12480:2015

Gas meters. Rotary displacement gas meters

Status : Superseded, Withdrawn   Published : March 2015 Replaced By : BS EN 12480:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This European Standard specifies ranges, construction, performances, output characteristics and testing of rotary displacement gas meters (hereinafter referred to as RD meters or simply meters) for gas volume measurement. This European Standard applies to rotary displacement gas meters used to measure the volume of fuel gases of at least the 1st, 2nd and 3rd gas families, the composition of which is specified in EN 437:2003+A1:2009, at a maximum working pressure up to and including 20 bar over an ambient and gas temperature range of at least ?10 °C to +40 °C. This European Standard applies to meters that are installed in locations with vibration and shocks of low significance and in • closed locations (indoor or outdoor with protection as specified by the manufacturer) with condensing or with non-condensing humidity or, if specified by the manufacturer, • open locations (outdoor without any covering) with condensing humidity or with non-condensing humidity; Unless otherwise specified in this standard: • all pressures used are gauge; • all influence quantities, except the one under test, are kept relatively constant at their reference value. This European Standard also applies to meters with a maximum allowable pressure PS and the volume V of less than 6 000 bar • litres or with a product of PS and DN of less than 3 000 bar. NOTE These limits are the same as in EU directive 97/23/EC. This European Standard can be used for both pattern approval and individual meter testing. Cross-reference tables are given in: • Annex A for the tests that need to be undertaken for pattern approval; • Annex B for individual meter testing. Some parts of this standard cover meters with mechanical index only. The risk philosophy adopted in this standard is based on the analysis of hazards on account of pressure. The standard applies principles to eliminate or reduce hazards. Where these hazards cannot be eliminated appropriate protection measures are specified.




Standard NumberBS EN 12480:2015
TitleGas meters. Rotary displacement gas meters
StatusSuperseded, Withdrawn
Publication Date31 March 2015
Withdrawn Date12 March 2018
Normative References(Required to achieve compliance to this standard)ISO 6270-1:1998, EN ISO 11666:2010, ISO 11666:2010, EN ISO 898-1:2013, ISO 17663:2009, ISO 7724-3:1984, ISO 1518-2:2011, ASTM A 194/A 194M:2012, ISO 1083:2004, EN ISO 17636-2:2013, EN ISO 15609-1:2004, EN ISO 9606-1:2013, ISO 17636-2:2013, ISO 10675-1:2008, EN ISO 15614-1:2004, EN ISO 1518-2:2011, EN ISO 14732:2013, ISO 15614-2:2005, EN ISO 15614-2:2005, ASTM A 266/A 266M:, ASTM A 193/A 193M:2012, ISO 898-1:2013, EN ISO 23279:2010, EN 60730-1:2000, ISO 9606-1:2012, ASTM A 106/A 106M:2011, ISO 9606-2:2004, ISO 17640:2010, EN 10025, ISO 15607:2003, EN 586-2:1994, EN ISO 9606-2:2004, ISO 898-2:2012, EN ISO 15607:2003, EN ISO 9712:2012, EN 755-2:2013, EN 10222-1:1998, EN 10083-1:2006, EN 1982:2008, EN 12165:2011, EN 10204:2004, EN 10250-1:1999, EN 10222-5:1999, EN 10028-3:2009, EN 1706:2010, EN 1759-4:2003, ISO 7005-2:1988, ISO 3506, EN 1092-2:1997, EN 10028-7:2007, EN 754-2:2013, EN 10088-1:2014, EN 1759-1:2004, EN 485-2:2013, EN 1092-4:2002, EN 10111:2008, EN 10028-2:2009, EN 10250-4:1999, EN 10028-6:2009, EN 12516-3:2002, EN 1092-1:2007+A1:2013, EN 10083-2:2006, EN 60529
Informative References(Provided for Information)EN 437:2003+A1:2009, IEC 60947-5-6:1999, EN 571-1:1997, ISO 7-1, EN ISO 23278:2009, EN 60068-2-30:2005, OIML R 137, ISO 17638:2003, ASME VIII div. 1:2001, IEC 60068-2-30:2005, EN 12405, OIML D11:2004, EN ISO 23277:2009, ISO 23277:2006, ASME B16.34:1996, ISO 23278:2006, ISO 9001:2008, EN ISO 17638:2009, EN 50039, 97/23/EC, EN 60947-5-6:2000, EN 1333, EN ISO 9001:2008
Replaced ByBS EN 12480:2018
ReplacesBS EN 12480:2002
International RelationshipsEN 12480:2015
DescriptorsRatings, Gas-supply meters, Design, Temperature, Flow rates, Pressure, Accuracy, Dimensions, Gas flow, Flow measurement, Performance, Marking, Performance testing, Volume flowmeters, Type testing
ICS91.140.40
Title in FrenchCompteurs de gaz. Compteurs de gaz à déplacement rotatif
Title in GermanGaszähler. Drehkolbengaszähler
CommitteeGSE/25
ISBN978 0 580 86491 9
PublisherBSI
FormatA4
DeliveryYes
Pages76
File Size1.118 MB
Price£274.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version