BS ISO 17842-1:2015 - Safety of amusement rides and amusement devices. Design and manufacture

BS ISO 17842-1:2015

Safety of amusement rides and amusement devices. Design and manufacture

Status : Under review, Current   Published : July 2015



This part of ISO 17842 specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of the following: mobile, temporary or permanently installed machinery and structures, e.g. roundabouts, swings, boats, Ferris wheels, roller coasters, chutes, grandstands, membrane or textile structures, booths, stages, side shows, and structures for artistic aerial displays. The above items, hereafter called amusement devices or simply “devices”, are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Fixed grandstands, construction site installations, scaffolding, removable agricultural structures and simple coin operated children’s amusement devices intended for up to 3 children are not covered by this document.

Nevertheless this document can be used in the design of any similar structural or passenger-carrying device not explicitly mentioned herein.

Existing national rules on workers’ safety are not concerned by this document.

This document is applicable to amusement devices and major modifications of amusement devices and rides manufactured after the effective date of its publication.

ISO 17842‑3 contains requirements for inspection during design, manufacture, operation and use.

Standard NumberBS ISO 17842-1:2015
TitleSafety of amusement rides and amusement devices. Design and manufacture
StatusUnder review, Current
Publication Date31 July 2015
Normative References(Required to achieve compliance to this standard)IEC 60204-1:2005, EN 1993-1-1, ISO 13857:2008, ISO 17637, ISO 17636-1:2013, ISO 3834-1, IEC 61800-5-2, ISO 17635, ISO 14732, ISO 9606-1, ISO 17638, EN 10160, ISO 15612, ISO 10547, ISO 7250, EN 1995-1-1, EN 288-9, EN 755, EN 1176, EN 10210, ISO 5817:2014, ISO 14120, ISO 9712:2012, EN 1677, ISO 10556, EN 485, EN 12385, IEC 61558-1, ISO 14731, ISO 17640:2010, IEC 60364-7-740, IEC 62305, IEC 60364-5-54, ISO 3834-3, ISO 9692-1, ISO 10572, ISO 10474:2013, EN 10204:2004, EN 10025-1, ISO 1346, EN 10025-2:2019, EN 1069-1:2017, BS EN 10164:2018, EN 10025-3:2019, ISO 898-1, EN 1991-1-4:2005, ISO 4032, EN 1993-1-9:2005, ISO 1141, ISO 2307, ISO 4017, ISO 4034, BS EN ISO 9554:2019, ISO 10325:2018, ISO 15609-1, ISO 9692-2, BS EN 10025-2:2019, ISO 4414, BS EN 10025-3:2019, BS EN ISO 10325:2018, ISO 4413, ISO 4018, ISO 4016, ISO 1181, ISO 4014, ISO 9554:2019, EN 10164:2018, ISO/IEC 17020, ISO 23277, ISO 11666, ISO 15614-2, IEC 60204-32, ISO 15611, ISO 15607, EN 1993-1-8, ISO 14118, EN 10219, ISO 10554, 2009/105/EC, ISO 15610, ISO 13849-1, ISO 14122-1, ISO/TS 17929:2014, ISO 13849-2, ISO 15614-1, IEC 60364-4-4
Informative References(Provided for Information)ISO/TR 15608:2017, 2006/7/EC, ISO 9692-3, EN 1837, DIN 33402-2, GOST 12.2.049, EN 1090, EN 1993-1-4, ASTM F1637-09, BGR 181, DIN 51097, GOST R 53130, AS 3533.1, ISO/TR 20173, EN 1991-1-3, ISO/TR 20172, ISO 12944, EN 1990, DIN 51130, EN 1776, ISO/TR 23849
International RelationshipsISO 17842-1:2015
Draft Superseded By14/30278953 DC
DescriptorsVending machines, Commercial, Leisure equipment, Gambling equipment, Hazards, Lockers, Weighing machines, Protected electrical equipment, Paper money, Shoe machinery, Electrical safety, Electrically-operated devices, LOCKERS, SHOE MACHINERY, HAZARDS, COMMERCIAL, LEISURE EQUIPMENT, PAPER MONEY, VENDING MACHINES, WEIGHING MACHINES, ELECTRICALLY-OPERATED DEVICES, PROTECTED ELECTRICAL EQUIPMENT, GAMBLING EQUIPMENT, ELECTRICAL SAFETY
Title in FrenchSécurité des manèges et des dispositifs de divertissement. Conception et fabrication
ISBN978 0 580 82079 3
File Size2.831 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Worldwide Standards
We can source any standard from anywhere in the world


Access, view and download standards with multiple user access, across multiple sites with BSOL

Customers who bought this product also bought

  • BS ISO 17842-3:2015
    Safety of amusement rides and amusement devices Requirements for inspection during design, manufacture, operation and use
  • BS ISO 17842-2:2015
    Safety of amusement rides and amusement devices Operation and use