BS EN 50156-1:2015 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation

BS EN 50156-1:2015

Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation

Status : Current   Published : July 2015

Format
PDF

Format
HARDCOPY



This European Standard applies to the application design and installation of electrical equipment, control circuits and safety-related systems for furnaces which are operated with solid, liquid or gaseous fuels and their ancillary equipment. It specifies requirements to meet the operating conditions of furnaces, to reduce the hazards of combustion and to protect the heated systems from damage e.g. by overheating. Such furnaces and the electrical equipment may be part by way of example of the following plant: a) water heating systems; b) steam boiler installations (steam and hot-water boilers) and heat recovery steam boilers; NOTE 1 The requirements of this standard apply according to the electrical equipment of electrically heated steam boilers. NOTE 2 Seagoing vessels and offshore facilities are governed by International Maritime Law and as such are not within the scope of this standard. These requirements may be used for such facilities. c) warm air heaters; d) hot-gas heaters; e) heat exchanger systems; f) combustion chambers of stationary turbines; g) as long as no other standard is applicable for combined heat and power stations, we recommend the use of the requirements of this standard; h) This standard may also be used as reference for electrical equipment requirements for thermo-processing equipment. The requirements in this standard are not applicable to electrical equipment for: i) non-electrically heated appliances and burner control systems for household and similar purposes; j) furnaces using technologies for the direct conversion of heat into electrical energy; k) combustion chambers of non-stationary prime movers and turbines; l) central oil supply systems for individual heating appliances; m) furnaces using solid fuels for heating purposes for household use with a nominal thermal output up to 1 MW; n) furnaces which are used to heat process fluids and gasses in chemical plant. This European Standard may be used as a basis for the requirements placed on electrical equipment for furnaces, which are excluded from its field of application.




Standard NumberBS EN 50156-1:2015
TitleElectrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
StatusCurrent
Publication Date31 July 2015
Normative References(Required to achieve compliance to this standard)EN 61000-4, IEC 60364-4-41:2005, EN 60445:2010, EN 55022:2010, IEC 61000-4-7:201X, CISPR 11:2009, IEC 60947-2:2006, EN 61082-1:2006, EN 61508-6:2010, EN 55011:2009, EN 60947-5-1:2004, IEC 61000-4, IEC 60364-4, IEC 60417, EN 60332-2-1, IEC 81346-1, IEC 60309-1:1999, EN 60332-1-1, CISPR 22:2008, EN 81346-1, IEC 60445:2010, IEC 60529:1989, EN 61810-1:2008, EN 12953-12:2003, EN 12953-7:2002, EN 12952-9:2002, IEC 60654-3:1983, EN 12952-16:2002, EN 12952-8:2002, IEC 60536-2:1992, EN 60529:1991, EN 12953-6:2011, EN 12952-7:2012, EN 61508-2:2010, IEC 61558-1:2005, EN 60947-3:2009, EN 60664-1:2007, IEC 60947-5-1:2003, IEC 60947-3:2008, EN 60947-4-1:2010, FprEN 61000-6-7:2014, IEC 61508-6:2010, EN 60654-3:1997, IEC 61082-1:2006, IEC 61810-1:2008, EN 60309-1:1999, EN 60034, EN 60417, IEC 60664-1:2007, IEC 61508-2:2010, IEC 60617, HD 60364-4, ISO 3864, IEC 60034-1, IEC 60947-4-1:2009, IEC 61508-1:2010, EN 60947-2:2006, EN 61508-1:2010, HD 60364-4-41:2007, EN 61558-1:2005
Informative References(Provided for Information)IEC 60519-1:2010, EN 61131-3:2003, EN 60519-1:2011, EN 61508-5:2010, EN 61140: 2002, EN 61508-4:2010, IEC 60364-5-54:2011, IEC 61140:2001, IEC 61508-3:2010, IEC 60092-101:1994, HD 60364-5-54:2011, EN 61508-3:2010, IEC 61508-4:2010, EN ISO 13850:2008, IEC 60204-1:2005, IEC 61131-3:2003, IEC 61508-5:2010, EN 60204-1:2006, EN 50160:2010, IEC 60050-191:1990, ISO 13850:2006
ReplacesBS EN 50156-1:2004
International RelationshipsEN 50156-1:2015
Draft Superseded By12/30260546 DC
DescriptorsProtected electrical equipment, Warm-air heating, Flow charts, Error detection, Combustion chambers, Electrical connections, Electric conductors, Installation, Computer software, Steam boilers, Hot-water central heating, Turbines, Safety devices, Electrical safety, Stationary, Electric cables, Furnaces, Electrical protection equipment, Electrical equipment, Gas-powered devices, Switches, Heat exchangers, Documents, Maintenance, Computer hardware, Heating equipment, Circuits, Auxiliary, Earthing
ICS27.060.01
Title in FrenchEquipements électriques d'installation de chaudière. Règles pour la conception, pour l'application et l'installation
Title in GermanElektrische Ausrüstung von Feuerungsanlagen und zugehörige Einrichtungen. Bestimmungen für die Anwendungsplanung und Errichtung
CommitteePEL/27
ISBN978 0 580 78403 3
PublisherBSI
FormatA4
DeliveryYes
Pages80
File Size1.911 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN 50156-2:2015
    Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems
  • BS EN 10222-3:2017
    Steel forgings for pressure purposes Nickel steels with specified low temperature properties