PD IEC/TS 61967-3:2014 - Integrated circuits. Measurement of electromagnetic emissions. Measurement of radiated emissions. Surface scan method

PD IEC/TS 61967-3:2014

Integrated circuits. Measurement of electromagnetic emissions. Measurement of radiated emissions. Surface scan method

Status : Current   Published : September 2014

Format
PDF

Format
HARDCOPY



IEC TS 61967-3:2014 provides a test procedure which defines an evaluation method for the near electric, magnetic or electromagnetic field components at or near the surface of an integrated circuit (IC). This diagnostic procedure is intended for IC architectural analysis such as floor planning and power distribution optimization. This test procedure is applicable to measurements on an IC mounted on any circuit board that is accessible to the scanning probe. In some cases it is useful to scan not only the IC but also its environment. For comparison of surface scan emissions between different ICs, the standardized test board defined in IEC 61967-1 should be used. This measurement method provides a mapping of the electric or magnetic near-field emissions over the IC. The resolution of the measurement is determined by the capability of the measurement probe and the precision of the probe-positioning system. This method is intended for use up to 6 GHz. Extending the upper limit of frequency is possible with existing probe technology but is beyond the scope of this specification. Measurements may be carried out in the frequency domain or in the time domain. This edition includes the following significant technical changes with respect to the previous edition:


a) Removal of: Clause 9.4 Data analysis and Annex D Analysing the data from near-field surface scanning;


b) Addition of: Introduction, Clause 9.4 Measurement data, Clause 9.5 Post-processing, Clause 9.6 Data exchange and Annex D Coordinate systems;


c) Expansion of: Clause 8.4 Test technique and Annex A Calibration of near-field probes.




Standard NumberPD IEC/TS 61967-3:2014
TitleIntegrated circuits. Measurement of electromagnetic emissions. Measurement of radiated emissions. Surface scan method
StatusCurrent
Publication Date30 September 2014
Normative References(Required to achieve compliance to this standard)IEC 60050, IEC 61967-1
Informative References(Provided for Information)IEC TR 61967-1-1, IEC 61967-6
ReplacesDD IEC/TS 61967-3:2005
International RelationshipsIEC/TS 61967-3:2014
DescriptorsIntegrated circuits, Noise (spurious signals), Electrical measurement, Electromagnetic fields, Electronic equipment and components, Electrical testing, Radio disturbances, Emission, Probes, Circuits, Electromagnetic radiation, Scanners, Radiofrequencies, Surfaces
ICS31.200
Title in FrenchCircuits intégrés. Mesure des émissions électromagnétiques. Mesure des émissions rayonnées. Méthode de balayage en surface
CommitteeEPL/47
ISBN978 0 580 78113 1
PublisherBSI
FormatA4
DeliveryYes
Pages38
File Size2.421 MB
Price£214.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards