BS EN 10088-3:2014 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

BS EN 10088-3:2014

Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Status : Current, Under review   Published : October 2014

Format
PDF

Format
HARDCOPY



What is this standard about?

This is the third of a five-part European standard on stainless steels. This part covers technical delivery conditions for stainless steels for general purposes, including cables and fasteners.

Who is this standard for?

It‘s been developed for use by technical experts procuring semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general and construction purposes.

It also has particularly important information for all cable manufactures and fastener manufacturers.

Why should you use this standard? 

It specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resisting stainless steels for general purposes.

General purposes include the use of stainless steels in contact with foodstuffs.

This document defines a set of data that, for conformance with the standard, must be specified when ordering a product, e.g. the desired quantity, the product form (e.g. round bars, square bars or rod), whether an inspection is required and marking of the product.

NOTE: This standard does not apply to components manufactured by further processing of the product forms with quality characteristics altered as a result of such further processing.

What’s changed since the last update?

This revision supersedes the 2005 version of the standard which is withdrawn. The principal changes are:

  • Addition of austenitic grades 1.4615, 1.4646, 1.4020, 1.4378
  • Addition of austenitic-ferritic (duplex) grades 1.4162, 1.4662, 1.4482, 1.4062, 1.4669
  • Addition of ferritic grades 1.4611, 1.4621, 1.4613
  • Addition of martensitic grade 1.4150
  • Addition of precipitation hardening grade 1.4612
  • Chemical composition was changed for following grades: austenitic grade 1.4597, austenitic-ferritic grade 1.4362
  • Standard inspection document is now a test report 2.2 according to BS EN 10204
  • Mechanical values changed for austenitic grade 1.4372, for martensitic grades 1.4313, 1.4028, 1.4122, 1.4057 and for precipitation hardening grade 1.4606
  • Mechanical values for bright bars have been changed for: austenitic grades 1.4305, 1.4529, 1.4378, 1.4020, austenitic-ferritic grades 1.4062, 1.4162, 1.4482, 1.4662, 1.4507 and martensitic grades 1.4028, 1.4122, 1.4057



Standard NumberBS EN 10088-3:2014
TitleStainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
StatusCurrent, Under review
Publication Date31 October 2014
Normative References(Required to achieve compliance to this standard)EN 10027-2, EN 10021, ISO 6892-2, ISO 286-1, EN ISO 6506-1, ISO 6506-1, EN 10163-3, EN ISO 286-1, ISO 14284, EN ISO 3651-2, EN ISO 377, EN 10168, EN ISO 6892-2, EN ISO 148-1, EN 10221, EN ISO 14284, EN 10052:1993, EN ISO 6892-1, EN 10204, EN 10306, EN 10027-1, ISO 6892-1, EN 10308, EN 10079:2007, ISO 377, ISO 3651-2, EN 10088-1:2014
Informative References(Provided for Information)EN 10264-4, EN 10213-4, EN 10302, ISO 15510, CEN/TR 10261, EN 10222-5, EN 10272, EN 10270-3, EN 10263-5, EN 10095, EN 10250-4
ReplacesBS EN 10088-3:2005
International RelationshipsEN 10088-3:2014
Draft Superseded By11/30254168 DC
DescriptorsProof stress, Austenitic steels, Stainless steels, Steels, Ferritic steels, Impact strength, Finishes, Surface treatment, Chemical composition, Martensitic steels, Surface texture, Designations, Corrosion-resistant steels, Marking, Test specimens, Tensile strength, Compositional tolerances, Metal sections, Approval testing, Wires, Hardness, Cold-working, Hot-working, Bars (materials), Elongation at fracture, Thickness, Inspection, Semi-finished products, Rolling, Precipitation hardening, Corrosion resistance, Heat treatment
ICS77.140.20
77.140.50
77.140.65
Title in FrenchAciers inoxydables. Conditions techniques de livraison pour les demi-produits, barres, fils tréfilés, profils et produits transformés à froid en acier résistant à la corrosion pour usage général
Title in GermanNichtrostende Stähle. Technische Lieferbedingungen für Halbzeug, Stäbe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus korrosionsbeständigen Stählen für allgemeine Verwendung
CommitteeISE/105
ISBN978 0 580 76854 5
PublisherBSI
FormatA4
DeliveryYes
Pages80
File Size1.487 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought