BS EN 16228-1:2014 - Drilling and foundation equipment. Safety. Common requirements

BS EN 16228-1:2014

Drilling and foundation equipment. Safety. Common requirements

Status : Current, Under review   Published : August 2014



This European Standard specifies the common safety requirements for drilling and foundation equipment. Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping). NOTE 1 The requirements specified in this part of the standard are common to two or more families of drilling and foundation equipment. This document gives safety requirements for all types of drilling and foundation equipment and is intended to be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question. For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of EN 16228 parts 1, 2, and 4. The following machines are excluded from the scope of this standard: ? tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191; ? raise boring machines; ? drill rigs used in oil and gas industry. NOTE 2 Specific requirements for offshore applications are not covered by this European Standard. Where a drilling or foundation equipment of fixed configuration that is not intended to be separated is assembled using a carrier based on earth-moving equipment, agricultural equipment, or a crane, then the completed assembly will conform to the requirements specified in this drilling and foundation equipment standard. Drilling and foundation equipment within the scope of EN 16228 parts 1 to 6 may include interchangeable auxiliary equipment within the scope of EN 16228 part 7, either as an integral part of its construction or as interchangeably fitted equipment. If drilling and foundation equipment is intended to be used in a potentially explosive atmosphere, additional requirements will need to be met which are not covered by this standard.

Standard NumberBS EN 16228-1:2014
TitleDrilling and foundation equipment. Safety. Common requirements
StatusCurrent, Under review
Publication Date31 August 2014
Normative References(Required to achieve compliance to this standard)ISO 12100:2010, ISO 3411:2007, ISO 12508:1994, EN ISO 12100:2010, ISO 13856-3:2013, ISO 3747:2010, ISO 3457:2003, ISO 3449:2005, EN ISO 13850:2008, EN 60204-1:2006, ISO 13849-1:2006, EN ISO 13856-3:2013, ISO 7096:2000, ISO 4413:2010, ISO 2867:2011, EN ISO 4413:2010, EN ISO 2867:2011, EN ISO 13856-1:2013, EN ISO 11201:2010, EN ISO 13856-2:2013, ISO 3744:2010, EN ISO 3411:2007, ISO 7731:2003, ISO 11201:2010, ISO 15817:2012, EN ISO 3450:2011, EN ISO 3744:2010, ISO 3450:2011, ISO 4302:1981, EN 474-1:2006+A4:2013, ISO 11203:1995, EN 1037:1995+A1:2008, EN 953:1997+A1:2009, EN 13309:2010, ISO 13850:2006, ISO 12117-2:2008, EN 474-5:2006+A3:2013, ISO 9614-2:1996, ISO 2860:1992, ISO 3795:1989, ISO 10532:1995, ISO 4871:1996, EN 795:2012, ISO 7000:2012, ISO 6750:2005, ISO 10570:2004, EN ISO 3471:2008, IEC 61310-1:2007, EN ISO 15667:2000, prEN 13001-2:2012, 2000/14/EC, prEN 16191:2010, ISO 3471:2008, EN ISO 3740:2000, EN ISO 13855:2010, ISO 10262:1998, EN 61310-1:2008, EN ISO 12001:2009, EN ISO 11688-2:2000, ISO 13855:2010, ISO 6405-2:1993, EN ISO 11688-1:2009, EN 1993-1-1:2005, CEN/TS 13001-3-2:2008, EN 13001-1:2004+A1:2009, ISO 12001:1996, ISO/TR 11688-1:1995, CEN/TR 15172-1:2005, EN 13001-3-1:2012+A1:2013, ISO 15667:2000, EN 12096:1997, ISO/TR 11688-2:1998, ISO/DIS 15818:2010, ISO 7010:2011, EN ISO 11200:2009, 2006/42/EC
ReplacesBS EN 791:1995+A1:2009, BS EN 996:1995+A3:2009
International RelationshipsEN 16228-1:2014
DescriptorsFire safety, Earth-moving equipment, Braking systems, Excavating equipment, Marking, Design, Noise (environmental), Sounding equipment, Instructions for use, Equipment safety, Control systems, Boring equipment (earthworks), Stability, Hazards, Acoustic measurement, Drilling rigs, Maintenance, Control equipment, Safety measures, Verification, Design calculations, Handbooks, Control devices
Title in FrenchMachines de forage et de fondation. Sécurité. Prescriptions communes
Title in GermanGeräte für Bohr- und Gründungsarbeiten. Sicherheit. Gemeinsame Anforderungen
ISBN978 0 580 73264 5
File Size2.859 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Collaborate, Innovate, Accelerate.


The faster, easier way to work with standards

Customers who bought this product also bought

  • BS EN 16228-2:2014
    Drilling and foundation equipment. Safety Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
  • BS EN 16228-4:2014
    Drilling and foundation equipment. Safety Foundation equipment
  • BS EN 16228-6:2014
    Drilling and foundation equipment. Safety Jetting, grouting and injection equipment
  • BS EN 16228-7:2014
    Drilling and foundation equipment. Safety Interchangeable auxiliary equipment