BS EN 12417:2001+A2:2009 - Machine tools. Safety. Machining centres – BSI British Standards

BS EN 12417:2001+A2:2009

Machine tools. Safety. Machining centres

Status : Current, Superseded   Published : August 2001 Replaced By : BS EN ISO 16090-1:2018

Format
PDF

Format
HARDCOPY



BS EN 12417:2001+A2:2009 Machine tools. Safety. Machining centres

BS EN 12417 specifies the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of machining centres.

BS EN 12417 takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. BS EN 12417 also applies to the workpiece transfer devices when they form an integral part of the machine.

BS EN 12417 deals with significant hazards relevant to machining centres when they are used as intended and under the conditions foreseen by the manufacturer. Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards.

BS EN 12417 applies to machines which are manufactured after its date of publication.

Contents of BS EN 12417:

  • Foreword
  • Introduction
  • Scope
  • Normative references
  • Terms and definitions
  • List of significant hazards
  • Safety requirements and/or protective measures
  • Verification of safety requirements and/or protective measures
  • Information for use
  • Guards on machining centres - Impact test method
  • Equipment for impact test
  • Illustrative figures used as examples
  • Noise emission measurement
  • Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC
  • Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC$
  • Bibliography
  • List of significant hazards and major sources of these hazards associated with machining centres
  • List of safety requirements and/or protective measures and their verification procedures

 




Standard NumberBS EN 12417:2001+A2:2009
TitleMachine tools. Safety. Machining centres
StatusCurrent, Superseded
Publication Date31 August 2001
Normative References(Required to achieve compliance to this standard)prEN ISO 14122-2:1999, EN 626-1:1994, EN ISO 11202:1995, prEN ISO 14122-3:1999, EN 1088:1995, EN 1037:1995, IEC 61496-2:1997, EN 953:1997, IEC 61496-1:1997, EN 954-1:1996, IEC 61000-6-2:1999, ISO 2806:1994, EN 60529:1991, EN 1050:1996, EN 1837:1999, EN 983:1996, EN 982:1996, EN 999:1998, ISO/TR 11688-2:1998, EN 292-2:1991, EN 894-3:2000, EN 294:1992, IEC 60204-1:1997, EN 574:1996, EN 292-1:199, prEN 1005:1998, EN 614, EN ISO 3744:1995, EN 61000-6-2, EN 349:1993, EN ISO 3746:1995, EN ISO 4871:1996, EN 61496-1:1997, EN ISO 11204:1995, EN ISO 11688-1:1998, EN 1127–1:1997, EN ISO 15641, ISO 15641:2001, EN 60204-1:1997, EN 60825-1:1994, EN ISO 9614-1:1995, EN 547:1996, EN 894:1997, prEN 13478:1999, EN 50081-2:1993, EN 1760–1:1997
Informative References(Provided for Information)2006/42/EC, prEN 693:1999, prEN 13985, prEN 12622, prEN 12957, 98/37/EC, EN 12626:1997, prEN 13736, 98/79/EC, EN ISO 7250:1997, prEN 12717, prEN 13236, prEN 13218, EN 418:1992, ISO 513:1991, EN 457:1992, ISO 7731:1986, ISO 11161:1994, ISO 683-1:1987 (R07), EN 1550:1997, EN 692:1996, ISO 11553:1996, ISO 7250:1996, prEN 13128, EN 12415, prEN 14070:2000, EN 12413, prEN 13898
Replaced ByBS EN ISO 16090-1:2018
International RelationshipsEN 12417:2001+A2:2009/AC:2010
Amended ByAMD 16900
Corrigendum, May 2010
DescriptorsAcoustic measurement, Machine guards, Hazards, Maintenance, Inspection, Impact testing, Safety measures, Verification, Equipment safety, Milling (engineering), Centres (machine tool components), Machine tools, Reports, Machine tool components, Occupational safety
ICS25.040.10
Title in FrenchMachines-outils. Sécurité. Centres d'usinage
Title in GermanWerkzeugmaschinen. Sicherheit. Bearbeitungszentren
CommitteeMTE/1/1
ISBN978 0 580 70547 2
PublisherBSI
FormatA4
DeliveryYes
Pages48
File Size1.028 MB
Price£240.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought