BS EN 10028-1:2007+A1:2009 - Flat products made of steels for pressure purposes. General requirements – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 10028-1:2007+A1:2009

Flat products made of steels for pressure purposes. General requirements

Status : Superseded, Withdrawn   Published : January 2008 Replaced By : BS EN 10028-1:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN 10028-1:2007+Amendment 1:2009 Flat products made of steels for pressure purposes. General requirements

BS EN 10028-1 has been amended to incorporate changes to sections on mechanical properties, and types of inspection and inspection documents. Some of the tables have also been updated, including: the summary of tests and extent of testing, test pieces for the impact test, position of test pieces, and chemical analysis.

BS EN 10028-1 specifies general technical delivery conditions for flat products for the construction of pressure equipment. The general technical delivery conditions in BS EN 10021 also apply.

About the BS EN 10028 series

The BS EN 10028 series of revised standards specifies general technical delivery conditions for flat products, sheet and plate, for the construction of pressure equipment.

The series has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC for pressure equipment (PED).

It is intended to be used by suppliers and users of steel intended for producing pressure vessels for use in e.g. high or low temperature applications.

The Parts of BS EN 10028 cover non-alloy and alloy steels with specified elevated temperature properties, weldable fine grain steels, nickel alloy steels with specified low temperature properties, and stainless steels. The BS EN 10028 series is referred to in both PD 5500 and the BS EN 13445 series of standards for pressure vessels.

Contents of BS EN 10028-1:

  • Foreword
  • Scope
  • Normative references
  • Terms and definitions
  • Dimensions and tolerances on dimensions
  • Calculation of mass
  • Classification and designation
  • Classification
  • Designation
  • Information to be supplied by the purchaser
  • Mandatory information
  • Options
  • Examples of ordering
  • Requirements
  • Steelmaking process
  • Delivery condition
  • Chemical composition
  • Mechanical properties
  • Surface condition
  • Internal soundness
  • Inspection
  • Types of inspection and inspection documents
  • Tests to be carried out
  • Retests, sorting and reprocessing
  • Sampling
  • Frequency of testing
  • Selection and preparation of samples and test pieces
  • Sampling and sample preparation
  • Preparation of test pieces
  • Test methods
  • Chemical analysis
  • Tensile test at room temperature
  • Tensile test at elevated temperature
  • Impact test
  • Other testing
  • Marking
  • Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC
  • Bibliography

Also of interest for pressure equipment manufacturers:

PD 5500:2009+A1:2009 Specification for unfired fusion welded pressure vessels

BS EN 13445-1:2009 Unfired pressure vessels. General




Standard NumberBS EN 10028-1:2007+A1:2009
TitleFlat products made of steels for pressure purposes. General requirements
StatusSuperseded, Withdrawn
Publication Date31 January 2008
Withdrawn Date22 August 2017
Cross ReferencesEN 10002-1:2001, EN 10002-5:1991, EN 10020:2000, EN 10021:2006, EN 10028-2:2003, EN 10028-3:2003, EN 10028-4:2003, EN 10028-5:2003, EN 10028-6:2003, EN 10028-7:2007, EN 10029, EN 10045-1:1990, EN 10048, EN 10051, EN 10052:1993, EN 10079:2007, EN 10088-1:2005, EN 10160, EN 10163-2:2004, EN 10164:2004, EN 10168:2004, EN 10204:2004, EN ISO 377, ISO 377:1997, EN ISO 2566-1, ISO 2566-1:1984, EN ISO 2566-2, ISO 2566-2:1984, EN ISO 3651-2, ISO 3651-2:1998, EN ISO 9445, ISO 9445:2002, EN ISO 14284, ISO 14284:1996, EN 10027-1, EN 10027-2, CEN/TR 10261, Guidelines 7/2 and 7/16 to 97/23/EC, 97/23/EC
Replaced ByBS EN 10028-1:2017
ReplacesBS EN 10028-1:2000
International RelationshipsEN 10028-1:2007+A1:2009,EN 10028-1:2007+A1:2009/AC:200
Amended ByCorrigendum, February 2010; Amendment, June 2009
DescriptorsSteels, Pressure equipment, Rolled products, Inspection, Strips, Testing, Test specimens, Sheet materials, Ordering, Delivery, Pressure vessels, Marking
ICS77.140.30
77.140.50
Title in FrenchProduits plats en acier pour appareils à pression. Prescriptions générales
Title in GermanFlacherzeugnisse aus Druckbehälterstählen. Allgemeine Anforderungen
CommitteeISE/103
ISBN978 0 580 70129 0
PublisherBSI
FormatA4
DeliveryYes
Pages24
File Size756 KB
Price£176.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.


Customers who bought this product also bought