BS EN 1906:2010 - Building hardware. Lever handles and knob furniture. Requirements and test methods – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 1906:2010

Building hardware. Lever handles and knob furniture. Requirements and test methods

Status : Revised, Withdrawn   Published : May 2010 Replaced By : BS EN 1906:2012

WITHDRAWN TITLE
*To ask about withdrawn titles contact the BSI Knowledge Centre knowledgecentre@bsigroup.com,
+44 20 8996 7004


BS EN 1906:2010 Building hardware. Lever handles and knob furniture. Requirements and test methods

BS EN 1906 is a European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles, knobs for doors, push pads and similar in combination with backplates or roses operating latches.

BS EN 1906 is applicable only to lever handles and knobs that operate a latch or a lock and other devices.

It specifies four categories of use according to frequency and other conditions of use.

Contents of BS EN 1906:

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 Coding system
4.1.1 General
4.1.2 Category of use (first digit)
4.1.3 Durability (second digit)
4.1.4 Door mass (third digit
4.1.5 Fire resistance (fourth digit)
4.1.6 Safety (fifth digit)
4.1.7 Corrosion resistance (sixth digit)
4.1.8 Security (seventh digit)
4.1.9 Type of operation (eighth digit)
4.2 Example of classification
5 Requirements
5.1 General
5.2 Check of spindle and fastening elements
5.3 Rotational torque strength
5.4 Axial strength of lock furniture or latch furniture and fixing
5.5 Free play and safety
5.5.1 Requirement for free play
5.5.2 Safety requirements
5.6 Free angular movement or misalignment
5.7 Torque of return mechanism
5.7.1 General
5.7.2 Unsprung and spring-assisted lever handles
5.7.3 Unsprung knobs
5.7.4 Spring-loaded lever handles or knobs
5.8 Durability of mechanism
5.9 Repeat test of axial strength of lock or latch furniture and methods of fixing
5.10 Repeat test of free play measurement
5.11 Repeat test of measurement of free angular movement or misalignment
5.12 Repeat test of torque of return mechanism
5.13 Axial strength for safety furniture (optional)
5.14 Corrosion resistance
6 Tests − Sequence and test
6.1 Test sequence
6.2 Test apparatus
6.2.1 Fixing to a test block (see Figures B.1 and B.2)
6.2.2 Apparatus for strength tests
6.2.3 Apparatus for endurance test
7 Test methods
7.1 General
7.2 Acceptance conditions
7.3 Performance tests
7.3.1 Check of spindle and fastening elements (Test 1)
7.3.3 Free play and safety (Test 3)
7.3.4 Free angular movement or misalignment (Test 4)
7.3.5 Torque of return mechanism (Test 5)
7.3.6 Durability of mechanism (Test 6)
7.3.7 Repeat test of axial strength and methods of fastening (Test 7)
7.3.8 Repeat check of free play (Test 8)
7.3.9 Repeat measurement of free angular movement (Test 9
7.3.10 Repeat test of torque of return mechanism (Test 10)
7.3.11 Axial strength and method of fastening of special safety furniture (Test 11 − optional)
7.3.12 Rotational strength (Test 12)
7.4 Corrosion resistance (Test 13)
8 Marking

 




Standard NumberBS EN 1906:2010
TitleBuilding hardware. Lever handles and knob furniture. Requirements and test methods
StatusRevised, Withdrawn
Publication Date31 May 2010
Withdrawn Date24 August 2012
Cross ReferencesEN 314-2:1993, EN 636:2003, EN 1634-1, EN 1634-2, EN 1634-3, EN 1670:2007, EN ISO/IEC 17025, ISO/IEC 17025:2005, ISO 10899, EN 179
Replaced ByBS EN 1906:2012
ReplacesBS EN 1906:2002
International RelationshipsEN 1906:2010
Draft Superseded By09/30203647 DC
DescriptorsIronmongery (buildings), Construction systems parts, Knobs (handles), Lever handles, Doors, Latches, Mortice latches, Closing and check mechanisms, Locks, Mechanical testing, Tensile testing, Torsion testing, Performance testing, Safety measures, Fire safety, Corrosion resistance, Anti-burglar measures, Grades (quality), Durability
ICS91.190
Title in FrenchQuincaillerie pour le bâtiment. Béquilles et boutons de porte. Exigences et méthodes d'essai
Title in GermanSchlösser und Baubeschläge. Türdrücker und Türknäufe. Anforderungen und Prüfverfahren
CommitteeB/538/4
ISBN978 0 580 67832 5
PublisherBSI
FormatA4
DeliveryNo
Pages52
File Size842.9 KB
Price£228.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the BSI Knowledge Centre knowledgecentre@bsigroup.com,
+44 20 8996 7004
 Your basket
Your basket is empty

Take the smart route to manage medical device compliance


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world