BS EN 1057 Copper and copper alloys. Seamless, round copper tubes

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 1057:2006+A1:2010

Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications

Status : Confirmed, Current   Published : June 2006

Format
PDF

Format
HARDCOPY



BS EN 1057:2006+Amendment 1:2010

Copper and copper alloys. Seamless, round copper tubes

Products in conformity with BS EN 1057 are considered suitable for drinking water applications subject to either:

a) compliance with any national regulations in the country of intended destination

b) compliance in due course with the proposed European Acceptance Scheme (EAS) that will introduce common EU requirements for testing for fitness for contact with drinking water.  When the EAS is implemented, BS EN 1057 will have added to it a special Annex (Z/EAS) to incorporate the provisions of the EC mandate M/136 and a) will no longer be applicable.

BS EN 1057 is the standard that provides the basis for the assessment of a manufacturer's production process for products manufactured in accordance with this European Standard. The assessment could be based on initial and continuing surveillance of the factory production control system which could be concurrent with an assessment of the manufacturer's quality management system against EN ISO 9001.

Regulatory marking and the means by which regulatory marking is applied, is also covered in BS EN 1057.

Tubes having an outside diameter of not more than 108 mm are suitable for soldering, brazing or assembling by mechanical compression, collared, push-fit or press fittings. For tubes having an outside diameter of more than 108 mm, assembly should preferably be performed by welding or braze welding.

Reference can be made to this European Standard for tubes intended for other applications or for the transportation of other fluids. In such cases special requirements (for specifications, conditioning or delivery conditions) can be agreed between the purchaser and the supplier.

Appropriate precautions should be taken if applying insulating/protecting material because it could be detrimental to the copper tube.

BS EN 1057 specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes.

It is applicable to tubes having an outside diameter from 6 mm up to and including 267 mm for:

  • Distributing networks for hot water and cold water
  • Hot water heating systems, including panel heating systems (under-floor, wall, overhead)
  • Domestic gas and liquid fuel distribution
  • Waste water sanitation.

It also applies to seamless round copper tubes intended to be pre-insulated before use for any of the above purposes.

Contents of  BS EN 1057 include:

  • Scope
  • Normative references
  • Terms and definitions
  • Designations
  • Symbol
  • Number
  • Material condition
  • Product
  • Ordering information
  • Material characteristics
  • Safety in case of fire – Reaction to fire
  • Properties at high temperature
  • Weldability
  • Requirements
  • Composition
  • Mechanical properties
  • Dimensions and tolerances
  • Nominal dimensions
  • Tolerances on outside diameter
  • Tolerances on wall thickness
  • Tolerances on length
  • Freedom from defects
  • Surface quality
  • Bending
  • Drift expanding
  • Flanging
  • Evaluation of conformity
  • Type testing
  • Sampling, testing and conformity criteria
  • Factory production control (FPC)
  • General FPC requirements
  • Manufacturer-specific FPC system requirements
  • Sampling
  • Test methods
  • Analysis
  • Tensile test
  • Hardness test
  • Carbon content test
  • Carbon film test
  • Bending test
  • Drift-expanding test
  • Flanging test
  • Freedom from defects tests
  • Retests
  • Inspection documentation
  • Marking and form of delivery
  • Standardized dimensions for reconsideration at a future revision
  • Carbon film test
  • Preparation of the test piece
  • Procedure
  • Detection and assessment of films
  • Freedom from defects tests
  • Eddy current test
  • Hydrostatic test
  • Pneumatic test
  • Clauses of this European Standard addressing the provisions of the EU Construction
  • Products Directive (CPD) 89/106/EEC
  • Scope and relevant characteristics
  • Procedure(s) for attestation of conformity of pipes
  • System(s) of attestation of conformity
  • EC Certificate and Declaration of conformity
  • CE marking and labelling
  • Relationship between this European Standard and the Essential Requirements of the EU
  • Pressure Equipment Directive (PED) 97/23/EC
  • Bibliography

Tables in BS EN 1057 include:

  • Mechanical properties
  • Minimal elongation values for R250 (half hard) material condition tubes
  • Standardized dimensions
  • Tolerances on outside diameter
  • Tolerances on wall thickness
  • Quantitative and qualitative specification for carbon residues
  • Testing of bending, drift expanding and flanging
  • Sampling rate
  • Minimum radius of curvature
  • Recommended form of delivery
  • Standardized dimensions for reconsideration at a future revision
  • Maximum drill diameters for the reference standard tube
  • Hydraulic pressure test
  • Relevant clauses
  • Systems of attestation of conformity
  • Assignment of evaluation of conformity tasks for pipes under system 3 — 1/5
  • Assignment of evaluation of conformity tasks for pipes under system 4 — 2/5
  • Correspondence between this European Standard and Directive 97/23/EC

BS EN 1057:2006+A1:2010 replaces BS EN 1057:1996 Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications which has been withdrawn.




Standard NumberBS EN 1057:2006+A1:2010
TitleCopper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
StatusConfirmed, Current
Publication Date30 June 2006
Confirm Date24 July 2017
Cross ReferencesEN 723, EN 1971, EN 10002-1, EN 10204:2004, EN ISO 8491, ISO 8491:1998, EN ISO 8493, ISO 8493:1998, EN ISO 8494, ISO 8494:1998, EN ISO 6507-1, ISO 6507-1:2005, EN ISO 9001, ISO 9001:2000, ISO 1553, ISO 4741, EN 1173, EN 1412, EN ISO 6708, ISO 6708:1995, ISO 857-1, ISO 857-2:2005, ISO 1190-1, 97/23/EC, 89/106/EEC, 93/68/EEC
ReplacesBS EN 1057:1996
International RelationshipsEN 1057:2006+A1:2010
Amended ByAmendment, March 2010
DescriptorsMarking, Water supply and waste systems (buildings), Pipes, Defects, Test methods, Designations, Quality control, Drainage, Sampling methods, Gas pipes, Water supply (buildings), Water, Heating equipment, Seamless pipes, Dimensional tolerances, Copper, Mechanical properties of materials, Copper alloys, Hot-water supply systems, Conformity, Pipework systems, Sanitary appliances, Waste-water drainage, Fluid equipment, Dimensions, Cold-water supply systems, Water heaters
ICS23.040.15
Title in FrenchCuivre et alliages de cuivre. Tubes ronds sans soudure en cuivre pour l'eau et le gaz dans les applications sanitaires et de chauffage
Title in GermanKupfer und Kupferlegierungen. Nahtlose Rundrohre aus Kupfer für Wasser- und Gasleitungen für Sanitärinstallationen und Heizungsanlagen
CommitteeNFE/34/3
ISBN978 0 580 67076 3
PublisherBSI
FormatA4
DeliveryYes
Pages40
File Size695 KB
Price£206.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards