BS 8530:2010

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS 8530:2010

Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification

Status : Confirmed, Current   Published : July 2010

Format
PDF

Format
HARDCOPY



BS 8530 specifies requirements for cast and extruded aluminium rainwater systems for use on buildings. It covers extruded aluminium rainwater pipes sized between DN 65 and DN 100.

It specifies the materials, dimensions, tolerances, mechanical properties, surface conditions, coatings, jointing methods, fixings and marking for the following components of the rainwater systems:
a) Gutters, including half round, beaded half round, beaded deep half round, Victorian ogee and moulded ogee gutters, fittings and accessories used for assembly or support
b) Rainwater pipes, fittings and accessories used for assembly or support.


Contents of BS 8530:
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions
5 Materials
6 Surface conditions
7 Coatings
8 Fitting connections and fixings
9 Marking
Annexes
Annex A (normative) Dimensions of half round and beaded half round gutters and gutter fittings
Annex B (normative) Dimensions of Victorian ogee gutters and gutter fittings
Annex C (normative) Dimensions of moulded ogee gutters and gutter fittings
Annex D (informative) Typical fittings for half round and beaded half round gutters
Annex E (informative) Typical fittings for Victorian ogee gutters
Annex F (informative) Typical fittings for moulded ogee gutters
Annex G (informative) Typical gutter and pipe support brackets
Annex H (normative) Dimensions of round pipes
Annex I (normative) Dimensions of square and rectangular pipes
Annex J (informative) Typical fittings for round pipes
Annex K (informative) Typical fittings for square and rectangular pipes
Annex L (normative) Measuring straightness
Bibliography
List of figures
Figure A.1 – Half round gutter profile and length
Figure A.2 – Beaded half round gutter profile and length
Figure B.1 – Victorian ogee gutter profile and length
Figure C.1 – Moulded ogee gutter profile and length
Figure D.1 – Examples of typical fittings for half round and beaded half round gutters
Figure E.1 – Examples of typical fittings for Victorian ogee gutters
Figure F.1 – Examples of typical fittings for moulded ogee gutters
Figure G.1 – Examples of typical rise and fall brackets
Figure G.2 – Examples of typical side and top rafter arm brackets
Figure G.3 – Examples of typical fascia brackets
Figure G.4 – Examples of typical pipe clips
Figure H.1 – Example of typical eared round pipe sockets
Figure I.1 – Examples of typical square and rectangular pipe sockets
Figure J.1 – Examples of typical fittings for round pipes
Figure K.1 – Examples of typical fittings for square and rectangular pipes
Figure L.1 – Open side gutter straightness
Figure L.2 – Closed side gutter straightness
Figure L.3 – Pipe straightness
List of tables
Table A.1 – Half round gutter dimensions
Table A.2 – Beaded half round gutter dimensions
Table A.3 – Deep beaded half round gutter dimensions
Table B.1 – Victorian ogee gutter dimensions
Table C.1 – Moulded ogee gutter and fitting spigot dimensions
Table H.1 – Dimensions of round pipes
Table I.1 – Dimensions of square and rectangular pipes




Standard NumberBS 8530:2010
TitleTraditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification
StatusConfirmed, Current
Publication Date31 July 2010
Confirm Date01 May 2015
Cross ReferencesBS 4842, BS 6496, BS EN 603-2, BS EN 755-2, BS EN 755-3, BS EN 755-4, BS EN 755-5, BS EN 755-7, BS EN 755-9, BS EN 1462:2004, BS EN 1559-1, BS EN 1559-4, BS EN 1706:2010, BS EN 1774, BS EN 2070-1, BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 12020-1, BS EN 12206-1, BS EN ISO 3506-1, BS EN ISO 3506-4, BS EN ISO 9227, BS EN 612, PD 6484
ReplacesBS 2997:1958
Draft Superseded By09/30196573 DC
DescriptorsRainwater control systems, Rainwater pipes, Gutters, Aluminium, Aluminium alloys, Pipes, Pipe fittings, Dimensions, Size, Pipe junctions, Coatings, Gutter fittings and accessories, Gutter brackets, Fixing, Marking, Profile, Spigot-and-socket joints, Straightness measurement
ICS91.060.20
CommitteeB/542/6
ISBN978 0 580 66239 3
PublisherBSI
FormatA4
DeliveryYes
Pages30
File Size3.779 MB
Price£164.00


 Your basket
Your basket is empty

Take the smart route to manage medical device compliance


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Join us for the 10th anniversary Fire Safety Conference.