BS EN 10028-2:2009 - Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 10028-2:2009

Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties

Status : Superseded, Withdrawn   Published : June 2009 Replaced By : BS EN 10028-2:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN 10028-2:2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties

BS EN 10028-2 is the European standard that specifies requirements for flat products for pressure equipment made of weldable nonalloy and alloy steels with elevated temperature properties as specified.

About the BS EN 10028 series

The BS EN 10028 series of revised standards specifies general technical delivery conditions for flat products, sheet and plate, for the construction of pressure equipment.

The series has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC for pressure equipment (PED).

It is intended to be used by suppliers and users of steel intended for producing pressure vessels for use in e.g. high or low temperature applications.

The Parts of BS EN 10028 cover non-alloy and alloy steels with specified elevated temperature properties, weldable fine grain steels, nickel alloy steels with specified low temperature properties, and stainless steels. The BS EN 10028 series is referred to in both PD 5500 and the BS EN 13445 series of standards for pressure vessels.

The requirements and definitions of BS EN 10028-1:2007+ A1:2009 also apply.

BS EN 10028-2 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports the essential requirements of the EU Pressure Equipment Directive (97/23/EC).

Adequacy of the material to a specific item of equipment should not be presumed.

Consequently, the technical data included in BS EN 10028-2, should be assessed against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied.

Contents of BS EN 10028-2 include:

  • Foreword
  • Scope
  • Normative references
  • Terms and definitions
  • Dimensions and tolerances on dimensions
  • Calculation of mass
  • Classification and designation
  • Information to be supplied by the purchaser
  • Mandatory information
  • Options
  • Example for ordering
  • Requirements
  • Steelmaking process
  • Delivery condition
  • Chemical composition
  • Mechanical properties
  • Surface condition
  • Internal soundness
  • Resistance to hydrogen induced cracking
  • Embrittlement of CrMo steels
  • Inspection
  • Types of inspection and inspection documents
  • Tests to be carried out
  • Retests
  • Sampling
  • Test methods
  • Marking
  • Guidelines for heat treatment5
  • Critical time temperature parameter Pcrit. and possible combinations of stress relieving temperature and holding time
  • Reference data of strength values for 1 % (plastic) creep strain and creep
    rupture
  • Evaluation of resistance to hydrogen induced cracking
  • Step cooling test
  • Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC
  • Bibliography

BS EN 10028 is the European standard consisting of the following parts, under the general title Flat products made of steels for pressure purposes:

Part 1: General requirements
Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Part 3: Weldable fine grain steels, normalized
Part 4: Nickel alloy steels with specified low temperature properties
Part 5: Weldable fine grain steels, thermomechanically rolled
Part 6: Weldable fine grain steels, quenched and tempered
Part 7: Stainless steels

BS EN 10028-2:2009 supersedes BS EN 10028-2:2003 which has been withdrawn

 




Standard NumberBS EN 10028-2:2009
TitleFlat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
StatusSuperseded, Withdrawn
Publication Date30 June 2009
Withdrawn Date23 August 2017
Cross ReferencesEN 10028-1:2007+A1:2009, EN 10204:2004, EN 10229:1998, EN 1011-1, EN 1011-2, EN 10020, EN 10314, ISO 6303, 97/23/EC
Replaced ByBS EN 10028-2:2017
ReplacesBS EN 10028-2:2003
International RelationshipsEN 10028-2:2009
Draft Superseded By08/30187555 DC
DescriptorsHigh temperatures, Creep, Pressure vessels, Elongation at fracture, Steels, Sheet materials, Unalloyed steels, Strips, Pressure equipment, Chemical composition, Proof stress, Heat treatment, Impact strength, Alloy steels, Tensile strength, Yield strength, Thickness, Rupture stress
ICS77.140.30
77.140.50
Title in FrenchProduits plats en aciers pour appareils à pression. Aciers non alliés et alliés avec caractéristiques specifiées à température élevée
Title in GermanFlacherzeugnisse aus Druckbehälterstählen. Unlegierte und legierte Stähle mit festgelegten Eigenschaften bei erhöhten Temperaturen
CommitteeISE/103
ISBN978 0 580 64185 5
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size606 KB
Price£176.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN ISO 1461:2009
    Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
  • BS EN 10025-6:2004+A1:2009
    Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
  • BS EN 10025-3:2004
    Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
  • BS EN 10025-1:2004
    Hot rolled products of structural steels General technical delivery conditions