BS EN 61851-1:2011 - Electric vehicle conductive charging system. General requirements

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 61851-1:2011

Electric vehicle conductive charging system. General requirements

Status : Superseded, Withdrawn   Published : August 2011 Replaced By : BS EN IEC 61851-1:2019, BS EN 62752:2016

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


IEC 61851-1:2010 applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network. It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. The main changes with respect to the first edition of this standard are:


- revision of connector definitions and current levels (Clause 8);


- modification definition of pilot wire to pilot function;


- division of Clause 9 to create Clauses 9 and 11;


- Clause 9: specific requirements for inlet, plug and socket-outlet;


- Clause 11: EVSE requirements: the basic generic requirements for charging stations;


- renumbering of annexes;


- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;


- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;


- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;


- new informative Annex C describing an alternative pilot function system.



This publication is of high relevance for Smart Grid.




Standard NumberBS EN 61851-1:2011
TitleElectric vehicle conductive charging system. General requirements
StatusSuperseded, Withdrawn
Publication Date31 August 2011
Withdrawn Date19 July 2019
Cross ReferencesIEC 60038:2009, IEC 60068-2-30:2005, IEC 60068-2-75:1997, IEC 60068-2-78:2001, IEC 60276, IEC 60309-1:1999, IEC 60309-2:1999, IEC 60364-4-41:2005, IEC 60529:1989, IEC 60664-1:2007, IEC/TR 60755:2008, IEC 60884-1:2002, IEC 60884-2-5:1995, IEC 60947-3:2008, IEC 60950-1:2005, IEC 60950-1:2005/Corrigendum:2006, IEC 60990:1999, IEC 61000-6-1:2005, IEC 61000-6-3:2006, IEC 61008-1:2010, IEC 61009-1:2010, IEC 61180-1:1992, IEC 62196-1:2003, ISO 6469-2:2009, ISO 6469-3:2001, SAE J1772:2010, EN 50065-1:2001, FprEN 60038:2011, EN 60068-2-30:2005, EN 60068-2-75:1997, EN 60068-2-78:2001, EN 60276, EN 60309-1:1999, EN 60309-1:1999/A11:2004, EN 60309-2:1999, EN 60309-2:1999/A11:2004, CENELEC HD 60364-4-41:2007, CENELEC HD 60364-4-41:2007/Corrigendum:2007, EN 60529:1991, EN 60529:1991/Corrigendum:1993, EN 60664-1:2007, EN 60947-3:2009, EN 60950-1:2006, EN 60950-1:2006/A11:2009, EN 60950-1:2006/A12:2011, EN 60990:1999, EN 61000-6-1:2007, EN 61000-6-3:2007, FprEN 61008-1, FprEN 61009-1, EN 61180-1:1994, EN 62196-1:2003, IEC 60050-442:1998, IEC 60068-2-1:2007, IEC 60068-2-14:2009
Replaced ByBS EN IEC 61851-1:2019, BS EN 62752:2016
ReplacesBS EN 61851-1:2001, IEC 61851-1:2001
International RelationshipsEN 61851-1:2011,IEC 60728-3:2017,IEC 61851-1:2010
Draft Superseded By08/30186704 DC
DescriptorsBattery-powered devices, Voltage, Electric charge, Road vehicles, Electrical safety, Electric motors, Direct current, Alternating current, Battery chargers, Electrical conductance, Electrically-operated devices
ICS43.120
Title in FrenchSystème de charge conductive pour véhicules électriques. Règles générales
Title in GermanElektrische Ausrüstung von Elektro-Straßenfahrzeugen. Konduktive Ladesysteme für Elektrofahrzeuge. Allgemeine Anforderungen
CommitteePEL/69
ISBN978 0 580 64015 5
PublisherBSI
FormatA4
DeliveryYes
Pages58
File Size820 KB
Price£246.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


27 November

Organizational Resilience Annual Conference 2019


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 61851-22:2002
    Electric vehicle conductive charging system A.C. electric vehicle charging station
  • BS EN 61851-21:2002
    Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply
  • BS EN 61851-23:2014
    Electric vehicle conductive charging system DC electric vehicle charging station
  • BS EN 61851-24:2014
    Electric vehicle conductive charging system Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging