BS EN 201:2009 - Plastics and rubber machines. Injection moulding machines. Safety requirements – BSI British Standards

BS EN 201:2009

Plastics and rubber machines. Injection moulding machines. Safety requirements

Status : Superseded, Withdrawn   Published : January 2010 Replaced By : BS EN ISO 20430:2020

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


BS EN 201:2009 Plastics and rubber machines. Injection moulding machines. Safety requirements

BS EN 201 specifies the essential safety requirements for injection moulding machines for the processing of plastics and/or rubber.

The following machines are not covered:

  • Machines on which the clamping unit can only be operated by the physical force of the operator;
  • Injection moulding machines with pneumatic drives for the platen movement;
  • Injection moulding machines with vertical platen movements driven by an electrical axis;
  • Blow moulding machines associated with an injection process (EN 422);
  • Machines for reaction injection moulding (RIM) (EN 1612-1);
  • Presses (EN 289);
  • Footwear moulding machines covered by EN 1845.

The safety requirements for the interaction between injection moulding machines and ancillary equipment are specified.

BS EN 201 covers magnetic clamping systems only if:

  • Machines have horizontal clamping units; and
  • The mould area is protected by guards; and
  • Such systems are delivered at the same time as the injection moulding machine by the machine manufacturer.

BS EN 201 does not cover requirements for the design of an exhaust system.

BS EN 201 is not applicable to injection moulding machines which are manufactured before the date of its publication as an EN.

Contents of BS EN 201:

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and protective measures
6 Verification of the safety requirements and/or protective measures
7 Information for use

 




Standard NumberBS EN 201:2009
TitlePlastics and rubber machines. Injection moulding machines. Safety requirements
StatusSuperseded, Withdrawn
Publication Date31 January 2010
Withdrawn Date09 July 2020
Normative References(Required to achieve compliance to this standard)CLC/TS 61496-2:2006, EN 574:1996/AMD 1:2008, EN 61496-1:2004, EN 60204-1:2006, IEC 61000-6-2:2005, EN ISO/IEC 17025:2005, EN 999:1998/AMD 1:2008, ISO 3746:1995/Technical Corrigendum 1:1995, EN 953, EN 1760-2:2001/AMD 1:2009, EN ISO 3744:2009, EN ISO 11202:2009, EN ISO 12100-2:2003, ISO/IEC 17025:2005, ISO 11201:1995/Technical Corrigendum 1:1997, EN ISO 13849-1:2008, ISO 12100-2:2003, ISO 12100-1:2003, ISO 3744:1994, EN ISO 3747:2009, ISO 14122-3:2001, IEC 61000-6-4:2006, IEC 60204-1:2005, EN ISO 14122-3:2001, EN 1088:1995/AMD 2:2008, EN ISO 12100-1:2003, ISO 13849-1:2006, EN 349:1993/AMD 1:2008, ISO/IEC 23002-3:2007, ISO 13850:2006, ISO 11201:1995, ISO 4871:1996, ISO 11202:1995, EN 60529:1991, EN 61000-6-4:2007, EN ISO 13850:2008, CLC/TS 61496-3:2008, ISO 13732-1:2006, EN ISO 11201:2009, EN 61000-6-2:2005, ISO 14122-4:2004, EN ISO 14122-2:2001, IEC 61496-1:2004, IEC 61496-3:2008, EN ISO 13732-1:2008, ISO 3746:1995, ISO 13857:2008, EN ISO 3746:2009, EN ISO 14122-4:2004, IEC 61496-2:2006, EN 1760-1:1997/AMD 1:2009, EN 982:1996/AMD 1:2008, EN ISO 13857:2008, EN IS
Informative References(Provided for Information)ISO/TR 11688-1:1995, ISO/TR 11688-2:1998, EN ISO 11688-1, EUROMAP 64, EUROMAP 67, EUROMAP 68, 98/79/EC, 98/37/EC, EN ISO 11688-2, 2006/42/EC, EUROMAP 69
Replaced ByBS EN ISO 20430:2020
ReplacesBS EN 201:1997
International RelationshipsEN 201:2009
Draft Superseded By07/30170114 DC
DescriptorsInjection moulding, Moulding equipment, Hazards, Plastics and rubber technology, Plastics-working machinery, Safety devices, Moulding (process), Temperature-rise limit, Safety measures, Dust, Instructions for use, Occupational safety, Clamps (mechanical), Noise (environmental), Interlocks, Accident prevention, Equipment safety, Gases, Verification, Machine guards, Anthropometric characteristics, Plastics, Electrical safety, Rubber, Test equipment
ICS83.200
Title in FrenchMachines pour les matières plastiques et le caoutchouc. Machines de moulage par injection. Prescriptions de sécurité
Title in GermanKunststoff- und Gummimaschinen. Spritzgießmaschinen. Sicherheitsanforderungen
CommitteeMCE/3/2
ISBN978 0 580 60020 3
PublisherBSI
FormatA4
DeliveryYes
Pages100
File Size1.696 MB
Price£274.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN ISO 4413:2010
    Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
  • BS EN ISO 4414:2010
    Pneumatic fluid power. General rules and safety requirements for systems and their components
  • BS EN ISO 13855:2010
    Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body