BS EN 61558-1:2005+A1:2009 - Safety of power transformers, power supplies, reactors and similar products. General requirements and tests – BSI British Standards

BS EN 61558-1:2005+A1:2009

Safety of power transformers, power supplies, reactors and similar products. General requirements and tests

Status : Superseded, Withdrawn   Published : April 2006 Replaced By : BS EN IEC 61558-1:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


BS EN 61558-1:2005 + A1:2009 Safety of power transformers, power supplies, reactors and similar products. General requirements and tests

BS EN 61558-1 deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and mechanical safety. This standard covers the various types of dry-type transformers, power supplies, including switch mode power supplies, and reactors, the windings of which may be encapsulated or non-encapsulated .

BS EN 61558-1 also applies to transformers, power supplies, switch mode power supplies, and reactors incorporating electronic circuits. This standard does not apply to external circuits and their components intended to be connected to the input and output terminals or socket-outlets of the transformers, power supplies and switch mode power supplies, and reactors.

Contents of BS EN 61558-1:

Introduction
Scope
Normative references
Classification
Marking and other information
Protection against electric shock
Change of input voltage setting
Output voltage and output current under load
No-load output voltage
Short-circuit voltage
Heating
Short circuit and overload protection
Mechanical strength
Protection against harmful ingress of dust, solid objects and moisture
Insulation resistance, dielectric strength and leakage current
Construction
Components
Internal wiring
Supply connection and other external flexible cables or cords
Terminals for external conductors
Provisions for protective earthing
Screws and connections
Creepage distances, clearances and distances through insulation
Resistance to heat, fire and tracking
Resistance to rusting
Measurement of creepage distances and clearances
Testing a series of transformers
Creepage distances (cr), clearances (cl) and distances through insulation (dti) Material group II (400 ≤CTI <600)
Creepage distances (cr), clearances (cl) and distances through insulation (dti) Material group I (CTI ≥600)
Glow-wire test
Requirements for manually operated switches which are parts of transformers assembly
Tracking test
Electronic circuits
Measuring network for touch-currents
Insulated winding wires for use as multiple layer insulation
Routine tests (production tests)
Examples to be used as a guide for 19.1
Examples of points of application of test voltages
Examples of points of measurement of creepage distances and clearances
Explanation of IP numbers for degrees of protection
Explanations of the application of 4.1.1.2.1 of IEC 60664-1
Optional tw–marking of transformers
Symbols to be used for thermal cut-outs
Coated printed circuit boards
Normative references to international publications with their corresponding European publications




Standard NumberBS EN 61558-1:2005+A1:2009
TitleSafety of power transformers, power supplies, reactors and similar products. General requirements and tests
StatusSuperseded, Withdrawn
Publication Date28 April 2006
Withdrawn Date25 June 2019
Normative References(Required to achieve compliance to this standard)EN 60068-2-75:1997, IEC 60664-3, EN 60269, IEC 60851-6, EN 60695-2-11:2001, IEC 60664-1, IEC 60085:1984, EN 60216, IEC 61140, IEC 60068-2-75, IEC 60454, IEC 60216, IEC 60245, IEC 60730, EN 60076-1:1997/AMD 11:1997, IEC 60068-2-6, EN 61032:1998, IEC 60065:2001, HD 566 S1:1990, ISO 4046-4:2002, IEC 60529:1989, EN 60529:1991/Corrigendum:1993, IEC 61058-1:2000, EN 60730-1:2000/AMD 14:2005, HD 60269-3-1:2004, IEC 60529, IEC 60998-2-2, EN 60269-3:1995, EN 60065:2002, EN 60851-5:1996, EN 60730-1:2000/AMD 12:2003, IEC 60384-14, EN 60068-2-2:1993, EN 60730-1:2000/AMD 13:2004, IEC 60947-7-1, IEC 60884-2-4, EN 60947-7-1:2002, IEC 60851-3, IEC 60998-2-1, EN 60851-3:1996, IEC 60269-3-1, IEC 60076-1, IEC 60112, IEC 60449:1973, IEC 60851-6:1996, IEC 60851-3:1996, EN 60529:1991, IEC 60068-2-32, IEC 61032:1997, IEC 60990:1990, EN 60695-2-10:2001, EN 60999-1:2000, IEC 60906-1, EN 61058-1:2002, EN 60127-3:1996/Corrigendum:1996, EN 60269-2:1995, EN 60320, IEC 60417-DB:2002, IEC 60664-1:1992, EN 60076-1:1997/AMD 12:2002, IEC 60851-5, ISO 8820, EN 60317, IEC 60691:2002, IEC 60999-1, EN 60068-2-
Informative References(Provided for Information)IEC 62041:2003, EN 61000-3-2:2000, IEC 60050-826:1982, IEC 60051, EN 60998-1:2004, EN 61000-3-3:1995, IEC 60998-1:2002, IEC 60050-421:1990, IEC 60038:1983, EN 60584-1:1995, IEC 61000-3-3:1994, EN 60051, CISPR 11:2003, IEC 61000-3-2:2000, EN 62041:2003, EN 60738-1:1999, EN 55014, IEC 60364-4-41:2001, IEC 60738-1:1998, IEEE 101:1987, IEC 60584-1:1995, ISO 3:1973, CISPR 14, HD 472 S1:1989, IEC 60050-195:1998
Replaced ByBS EN IEC 61558-1:2019
ReplacesBS EN 61558-1:1998
International RelationshipsEN 61125/A1 (IEC 61125/A1:2004,EN 61558-1 Amd 1 (03/09),IEC 61125:1992/AMD1:2004,IEC 61558-1:2005/AMD1:2009
Amended ByAMD 16909
Amendment, October 2009; Corrigendum, February 2007
Draft Superseded By01/207368 DC06/30158457 DC
DescriptorsElectric enclosures, Power output, Safety isolating transformers, Tracking tests, Drop tests, Small-power transformers, Electric terminals, Electrical insulation, Clearance distances, Type testing, Portable, Single-phase transformers, Flexible conductors, Windings, Polyphase transformers, Screws (bolts), Cable glands, Electrical equipment, Thermal testing, Impact testing, Leakage paths, Cut-out devices, Dielectric strength, Alternating-current transformers, Isolating transformers, Stationary, Mechanical testing, Overload protection, Rated frequencies, Electrical safety, Power transformers, Temperature-rise limit, Torque, Resistance measurement, Electrical protection equipment, Fire tests, Symbols, Earthing, Environmental testing, Rated voltage, Corrosion tests, Classification systems, Circuits, Electric power systems, Safety measures, Electrical testing, Transformers, Dielectric-strength tests, Short-circuit current tests, Dry-type transformers, Switches, Protected electrical equipment, Marking
ICS29.180
Title in FrenchSécurité des transformateurs, alimentations, bobines d'inductance et produits analogues. Exigences générales et essais
Title in GermanSicherheit von Transformatoren, Netzgeräten, Drosseln und dergleichen. Allgemeine Anforderungen und Prüfungen
CommitteePEL/96
ISBN978 0 580 68982 6
PublisherBSI
FormatA4
DeliveryYes
Pages168
File Size1.668 MB
Price£342.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 61558-2-6:2009
    Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
  • BS EN 61558-2-4:2009
    Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
  • BS EN 61558-2-1:2007
    Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
  • BS EN 61558-2-16:2009+A1:2013
    Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units