BS EN 1845:2007 - Footwear manufacturing machines. Footwear moulding machines. Safety requirements

BS EN 1845:2007

Footwear manufacturing machines. Footwear moulding machines. Safety requirements

Status : Current, Under review   Published : July 2008



This European Standard applies to footwear moulding machines which are intended for use in the shoe industry for the production of footwear and footwear components. These machines are: - direct-on sole moulding machines (see Figures 1, 2 and 3); - unit sole and footwear component moulding machines (see Figures 4 to 10); - full shoe and boot moulding machines (see Figure 11). This European Standard applies also to the mentioned machines when used for other products than footwear and footwear components, as far as these products require no other changes than a different mould. 1.2 This European Standard specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in l.1. It deals with all significant hazards, hazardous situations and events relevant to footwear moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). 1.3 The following machines are excluded from the scope of this European Standard unless used for direct-on sole moulding or reaction moulding: - moulding machines with static injection units and static mould stations (clamping units); - moulding machines with static metering and mixing units and mobile stations with linear configuration (mould carriers). 1.4 The European Standard does not deal with hazards created by the mixing and metering unit. NOTE For metering and mixing units, see EN 1612-1. The use of machines within the scope of this European Standard in industries other than those specified in 1.1 may give rise to hazards not considered during its preparation. NOTE For this application see also EN 201 and prEN 1612-2. 1.5 This European Standard also applies to the following additional equipment for material handling and operation which are an integ

Standard NumberBS EN 1845:2007
TitleFootwear manufacturing machines. Footwear moulding machines. Safety requirements
StatusCurrent, Under review
Publication Date31 July 2008
Normative References(Required to achieve compliance to this standard)EN 999, EN 574, CLC/TS 61496-3:2003, IEC 60204-1:2005, IEC 61496-1:2004, EN 1760-2, EN 61496-1:2004, EN 953, EN ISO 12100-1:2003, EN ISO 11688-1:1998, EN ISO 13732-1, EN 1005-2:2003, ISO 13850:2006, EN 894-2:1997, EN 547-1:1996, EN 626-2:1996, EN 614-1:2006, EN 1760-2:2001, EN 953:1997, EN 547-2:1996, EN 1037:1995, EN 1088:1995, EN 811:1996, EN 894-3:2000, EN 574:1996, EN 1005-3:2002, EN 983:1996, EN 982:1996, EN 1837:1999, EN 12545:2000, EN 294:1992, EN 1760-1:1997, ISO/TR 11688-1:1995, EN 999:1998, EN ISO 14121-1:2007, EN 60204-1:2006, EN ISO 13849-1:2006, EN 626-1:1994, CLC/TS 61496-2, CLC/TS 61496-2:2006, EN ISO 14122-1:2001, EN ISO 14122-2:2001, EN 60947-5-1:2004, ISO 12100-2:2003, ISO 12100-1:2003, EN ISO 13732-1:2006, ISO 13849-1:2006, EN 61496-1, EN 60947-5-1, EN 1760-1, ISO 13732-1:2006, EN ISO 12100-2:2003, EN 61310-1, ISO 14122-2:2001, EN 12545, IEC 60947-5-1:2003, ISO 14122-1:2001, EN ISO 13849-1, ISO 14121-1:2007, EN ISO 13850:2006
Informative References(Provided for Information)2006/42/EC, 98/79/EC, EN ISO 11689:1996, 98/37/EC, ISO 11689:1996, EN ISO 11688-2:2000, EN 775:1992, EN 201:1997, ISO/TR 11688-2:1998, EN 1612-2:2000, EN 1612-1:1997, ISO 10218:1992, ISO 11161:1994, EN 12464-1:2002
ReplacesBS EN 1845:1999
International RelationshipsEN 1845:2007
Draft Superseded By04/30110543 DC
DescriptorsElectrical safety, Maintenance, Machine guards, Ergonomics, Control devices, Marking, Cleaning, Noise control (acoustic), Forming (textiles), Footwear, Equipment safety, Safety measures, Dangerous materials, Operators (personnel), Temperature, Rotating electric machines, Conveyor belts, Noise (environmental), Moulding (process), Transportation, Moulded materials, Cut-out devices, Fumes, Verification, Installation, Hazards, Occupational safety, Instructions for use, Shoe machinery
Title in FrenchMachines pour la fabrication des chaussures. Machines de moulage pour chaussures. Prescriptions de sécurité
Title in GermanMaschinen zur Herstellung von Schuhwerk. Schuhformmaschinen. Sicherheitsanforderungen
ISBN978 0 580 54305 0
File Size1.182 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


The faster, easier way to work with standards

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Worldwide Standards
We can source any standard from anywhere in the world