BS EN 15381:2008 - Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays – BSI British Standards
We are currently experiencing technical difficulties affecting some customers making purchases using Visa credit or debit card. If you experience any difficulty completing a purchase, please email us on cservices@bsigroup.com.

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 15381:2008

Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays

Status : Current, Under review   Published : April 2009

Format
PDF

Format
HARDCOPY



BS EN 15381:2008 Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays

Geotextiles and geotextile-related products can be used in the construction and rehabilitation of roads and pavements. The main function of these products subjected to thermal, fatigue and reflective cracking is to reduce the amount of cracking in a new pavement or asphalt overlay. This can be achieved by reinforcement, stress relief, (interlayer) barrier or a combination of these functions.

BS EN 15381 specifies the relevant characteristics of metallic and non-metallic geotextiles and geotextile-related products used in the construction of pavements and asphalt overlays. It also describes the appropriate test methods to determine these characteristics.

BS EN 15381 may be used by designers, end-users and other interested parties and enables them to define which functions and conditions of use are relevant.

This standard also defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.

This standard does not apply to geosynthetic barriers, as defined in BS EN ISO 10318.

Contents of BS EN 15381:

Foreword
Introduction Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 Required characteristics and corresponding test methods
4.1 General
4.2 Characteristics relevant to specific conditions of use
4.2.1 General
4.2.2 Alkaline resistance
4.2.3 Melting point
4.2.4 Resistance to weathering
5 Evaluation of conformity
5.1 General
5.2 Verification of values
5.3 Initial type tests
5.4 Factory production control
5.5 Inspection
6 Marking
Annex A (normative) Factory production control
A.1 Items to be addressed in a factory production control system
A.1.1 General
A.1.2 Product design
A.1.3 Production
A.1.4 Finished products
A.1.5 Applicable to A.1.2, A1.3 and A.1.4 (to be used where appropriate)
A.2 Checklist for the assessment of a factory production control system
A.2.1 General
A.2.2 Checklist
Annex B (normative) Durability aspects
B.1 Weathering
B.2 Alkaline resistance
B.3 Corrosion resistance
Annex C (normative) Test method for the determination of the bitumen retention in paving fabrics used in pavements and asphalt overlays
C.0 Introduction
C.1 Scope
C.2 Test specimens Handling
C.2.2 Selection
C.2.3 Number and dimensions
C.2.4 Condition of specimens
C.3 Testing procedure
C.4 Test report
Annex D (normative) Tensile test on steel wire mesh.
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU
Construction Products Directive
ZA.1 Scope and relevant characteristics ZA.2 Procedure for the attestation of conformity of geotextiles and geotextile-related products used in pavements and asphalt overlays
ZA.2.1 Systems of attestation of conformity
ZA2.2 Certificate and declaration of conformity
ZA.3 CE-marking and labelling
Bibliography




Standard NumberBS EN 15381:2008
TitleGeotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
StatusCurrent, Under review
Publication Date30 April 2009
Cross ReferencesEN 1426, EN 10002-1, EN 10080, EN 10223-3, EN 10244-2, prEN 10348, EN 12224, EN 14030, ISO/TR 12960:1998, EN ISO 1043-1:2001, ISO 1043-1:2001, EN ISO 3146, ISO 3146:2000, EN ISO 9862, ISO 9862:2005, EN ISO 10318:2005, ISO 10318:2005, EN ISO 10319, ISO 10319:1993, EN ISO 10320, ISO 10320:1999, EN ISO 12236, ISO 12236:2006, EN ISO 13433, ISO 13433:2006, EN ISO 13934-1, ISO 13934-1:1999, EN ISO 15630-2, ISO 15630-2:2002, ASTM A975-97, ASTM D6637-01, EN 12226, EN 12591, EN ISO 9001, ISO 9001:2000, EN ISO 9864, ISO 9864:2005, EN ISO 13431, ISO 13431:1999, CR ISO 13434, ASTM D6140-00, AASHTO M288, 89/106/EEC, 93/68/EEC
International RelationshipsEN 15381:2008
Draft Superseded By05/19987383 DC
DescriptorsPavements (roads), Geosynthetic materials, Testing, Conformity, Roads, Geotextiles, Verification, Asphalts, Textile products, Bitumens, Construction materials, Exterior circulation spaces (buildings), Quality control
ICS59.080.70
93.080.20
Title in FrenchGéotextiles et produits apparentés. Caractéristiques requises pour l'utilisation dans les chaussées et couches de roulement en enrobés
Title in GermanGeotextilien und geotextilverwandte Produkte. Eigenschaften, die für die Anwendung beim Bau von Fahrbahndecken und Asphaltdeckschichten erforderlich sind
CommitteeB/553
ISBN978 0 580 53975 6
PublisherBSI
FormatA4
DeliveryYes
Pages40
File Size665 KB
Price£206.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


27 November

Organizational Resilience Annual Conference 2019


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.


Customers who bought this product also bought

  • BS EN 12504-1:2009
    Testing concrete in structures Cored specimens. Taking, examining and testing in compression
  • BS 812-124:2009
    Testing aggregates Method for determination of frost heave
  • BS EN 1097-8:2009
    Tests for mechanical and physical properties of aggregates Determination of the polished stone value
  • BS EN 1999-1-2:2007
    Eurocode 9. Design of aluminium structures Structural fire design