BS EN 62271-110:2005 - High-voltage switchgear and controlgear. Inductive load switching

BS EN 62271-110:2005

High-voltage switchgear and controlgear. Inductive load switching

Status : Superseded, Withdrawn   Published : March 2006 Replaced By : BS EN 62271-110:2009, BS EN 62271-202:2014, BS EN 62271-200:2012

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


Applicable to a.c. circuit-breakers designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1000 V and applied for inductive current switching with or without additional short-circuit current breaking duties. The standard is applicable to circuit-breakers in accordance with IEC 62271-100 that are used to switch high-voltage motor currents and shunt reactor currents and also to high-voltage contactors used to switch high-voltage motor currents. Switching unloaded transformers, i.e. breaking transformer magnetizing current, is not considered in this standard. The reasons for this are as follows: a) due to the non-linearity of the transformer core, it is not possible to correctly model the switching of transformer magnetizing current using linear components in a test laboratory. Tests conducted using an available transformer, such as a test transformer, will only be valid for the transformer tested and cannot be representative for other transformers; b) as detailed in the guide for application of IEC 62271-100 and IEC 60694, the characteristics of this duty are usually less severe than any other inductive current switching duty. It should be noted that such a duty may produce severe overvoltages within the transformer winding(s) depending on the circuit-breaker re ignition behaviour and transformer winding resonance frequencies. Short-line faults, out-of-phase current making and breaking and capacitive current switching are not applicable to circuit-breakers applied to switch shunt reactors or motors. These duties are therefore not included in this standard.




Standard NumberBS EN 62271-110:2005
TitleHigh-voltage switchgear and controlgear. Inductive load switching
StatusSuperseded, Withdrawn
Publication Date31 March 2006
Withdrawn Date01 April 2012
Normative References(Required to achieve compliance to this standard)EN 62271-100:2001, IEC 62271-100:2001
Informative References(Provided for Information)IEC 60470, EN 60470:2000
Replaced ByBS EN 62271-110:2009, BS EN 62271-202:2014, BS EN 62271-200:2012
International RelationshipsEN 62271-110:2005,IEC 62271-110:2005,IEC 62560:2011
DescriptorsType testing, Circuit-breakers, Electrical protection equipment, Electric current control, Ratings, Rated current, Alternating current, Electrical equipment, Electrical testing, High-voltage equipment, Short-circuit currents, Switches, Electric control equipment, Electric power distribution, Switchgear
ICS29.130.10
29.140.30
Title in FrenchAppareillage a haute tension. Manoeuvre de charges inductives
Title in GermanHochspannungs-Schaltgeraete und -Schaltanlagen. Schalten induktiver Lasten
CommitteePEL/17
ISBN0 580 47970 6
PublisherBSI
FormatA4
DeliveryNo
Pages30
File Size418 KB
Price£182.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version