BS EN 10025-5:2004 - Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance – BSI British Standards

BS EN 10025-5:2004

Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance

Status : Superseded, Withdrawn   Published : November 2004 Replaced By : BS EN 10025-5:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


Part 5 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled steels with improved atmospheric corrosion resistance in the grades and qualities given in Tables 2 and 3 (chemical composition) and Tables 4 and 5 (mechanical properties) in the usual delivery conditions as given in 6.3.

The thicknesses in which products of the steel grades and qualities specified in this document may be supplied are given in Table 1.

In addition to EN 10025-1:2004 the steels specified in this document are especially intended for use in welded, bolted and riveted components which shall have enhanced resistance to atmospheric corrosion, for service at ambient temperatures (subject to the restrictions described in 7.4.1).

The steels specified in this Part 5 are not intended to be heat treated except products delivered in the delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3).

This European Standard specifies requirements for flat and long products of hot rolled steels with improved atmospheric corrosion resistance in the grades and qualities given in chemical composition tables and mechanical properties tables in the usual delivery conditions.

The steels specified in this standard are intended for use in welded, bolted and riveted components which have enhanced resistance to atmospheric corrosion, for service at ambient temperatures.

The steels specified in this part of BS EN 10025 are not intended to be heat treated except products delivered in the delivery condition +N.




Standard NumberBS EN 10025-5:2004
TitleHot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
StatusSuperseded, Withdrawn
Publication Date17 November 2004
Withdrawn Date19 August 2019
Normative References(Required to achieve compliance to this standard)EN 10025-1:2004, EN 10279:2000, EN 10164:2018, BS EN 10164:2018, EN 10060, EN 10056-1, CR 10260, EN 10051, EN 10058, EN 10055, EN 10308, EN 10163-2, EN 10020, EN 10221, EN 10160, EN 10034, EN 10027-2, EN 10162, EN ISO 643, EN 10163-3, EN 10027-1, EN 10029, EN 10017, EN 10067, EN 10061, EN 10306, EN 10059, ISO 643:2003, EN 10024, EN 10163-1, EN 10048, EN 10056-2
Informative References(Provided for Information)EN 1011-2, ECSC IC 2:1983
Replaced ByBS EN 10025-5:2019
ReplacesBS EN 10155:1993
International RelationshipsEN 10025-5:2004
Draft Superseded By00/714923 DC
DescriptorsWidth, Size, Bars (materials), Designations, Form tolerances, Length, Structural steels, Chemical composition, Marking, Yield strength, Atmospheric corrosion, Strips, Flatness (surface), Impact strength, Steels, Inspection, Weather resistance, Surface treatment, Surface defects, Weldability, Metal sections, Thickness, Specimen preparation, Hollow sections, Elongation at fracture, Sheet materials, Tensile strength, Rolling, Testing conditions, Dimensional tolerances, Mechanical testing, Test specimens
ICS77.140.10
77.140.50
91.100.99
Title in FrenchProduits lamines a chaud en aciers de construction. Conditions techniques de livraison pour les aciers de construction a resistance amelioree a la corrosion atmosph rique
Title in GermanWarmgewalzte Erzeugnisse aus Baustaehlen. Technische Lieferbedingungen fuer wetterfeste Baustaehle
CommitteeISE/103
ISBN0 580 44782 0
PublisherBSI
FormatA4
DeliveryYes
Pages30
File Size433 KB
Price£182.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.


Customers who bought this product also bought

  • BS EN 10025-1:2004
    Hot rolled products of structural steels General technical delivery conditions
  • BS EN 10210-1:2006
    Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
  • BS EN 10204:2004
    Metallic products. Types of inspection documents
  • BS EN 1011-2:2001
    Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels