BS EN 10025-2:2004 - Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 10025-2:2004

Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels

Status : Superseded, Withdrawn   Published : November 2004 Replaced By : BS EN 10025-2:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This European Standard, a part of the BS EN 10025 series, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in chemical composition tables and mechanical properties tables in the delivery conditions. Chemical composition and mechanical properties of three engineering steels are also specified. This standard does not apply to structural hollow sections and tubes.

The technical delivery conditions apply to thickness ≥3 mm and ≤150 mm for long products of steel grade S450J0. The technical delivery conditions apply to thickness ≤250 mm for flat and long products of all other grades and qualities. In addition for flat products of qualities J2 and K2 the technical conditions apply to thickness ≤400 mm.

The steels specified in this standard are not intended to be heat treated except products delivered in delivery condition +N. Stress relief annealing is permitted.

Products delivered in +N condition can be hot formed and/or normalized after delivery..

Products made of steel grades S185, E295, E335 and E360 cannot be CE marked.

The steels specified in this Part 2 are not intended to be heat treated except products delivered in delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3).

Semi-finished products which are to be converted to rolled finished products conforming to this document should be the subject of special agreement at the time of the enquiry and order. The chemical composition can also be agreed at the time of the order, however the values should be within the limits of Tables 2 and 3.

For certain grades and product forms suitability for particular applications may be specified at the time of the enquiry and order (see 7.4.2, 7.4.3 and Table 10).




Standard NumberBS EN 10025-2:2004
TitleHot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels
StatusSuperseded, Withdrawn
Publication Date17 November 2004
Withdrawn Date19 August 2019
Cross ReferencesEN 1011-2, EN 10020, EN 10025-1:2004, EN 10027-1, EN 10027-2, EN 10163-1, EN 10163-2, EN 10163-3, EN 10164, EN 10221, CR 10260, EN 10017, EN 10024, EN 10029, EN 10034, EN 10048, EN 10051, EN 10055, EN 10056-1, EN 10056-2, EN 10058, EN 10059, EN 10060, EN 10061, EN 10067, EN 10162, EN 10279, EN 10160, EN 10306, EN 10308, EN ISO 643, ISO 643:2003, EN ISO 1461, ISO 1461:1999, EN ISO 14713, ISO 14713:1999, ECSC IC 2:1983
Replaced ByBS EN 10025-2:2019
ReplacesBS EN 10025:1993
International RelationshipsEN 10025-2:2004
Draft Superseded By98/705400 DC
DescriptorsMetal sections, Tensile strength, Yield strength, Sampling methods, Steelmaking, Structural steels, Designations, Rolling, Strength of materials, Hot-working, Unalloyed steels, Testing, Inspection, Sheet materials, Weldability, Test specimens, Steels, Testing conditions, Bars (materials), Strips, Grades (quality), Chemical composition, Semi-finished products, Impact strength, Sample location, Elongation, Marking
ICS77.140.10
77.140.45
77.140.50
91.100.99
Title in FrenchProduits lamines a chaud en aciers de construction. Conditions techniques de livraison pour les aciers de construction non allies
Title in GermanWarmgewalzte Erzeugnisse aus Baustaehlen. Technische Lieferbedingungen fuer unlegierte Baustaehle
CommitteeISE/103
ISBN0 580 44779 0
PublisherBSI
FormatA4
DeliveryYes
Pages38
File Size515 KB
Price£206.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


27 November

Organizational Resilience Annual Conference 2019


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 10025-1:2004
    Hot rolled products of structural steels General technical delivery conditions
  • BS EN 10210-1:2006
    Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
  • BS EN 10204:2004
    Metallic products. Types of inspection documents
  • BS EN 1011-2:2001
    Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels